05/07/2012
Molex has launched the Precision 2.4mm compression mount test connectors, which form what it claims is the industry's only vertical pcb launch configuration operating to 50GHz.
|
|
|
13/04/2012
Electronic Assembly's SYLOG-USB-2 data logger is designed to monitor and record ambient temperature, relative humidity and dew point.
|
|
|
22/03/2012
Keithley Instruments has introduced the Model 2657A High Power System SourceMeter instrument.
|
|
|
08/03/2012
A new 16 channel temperature/voltage plug in input module for the Yokogawa DL850 ScopeCorder has been added to the range of electrical and physical input modules available for the instrument.
|
|
|
01/02/2012
Rigol Technologies will introduce its DS4000 series digital oscilloscope, featuring up to 500MHz bandwidth at Embedded World.
|
|
|
30/01/2012
Agilent Technologies has announced a product enhancement designed to help engineers extend the capabilities of compliance applications on the company's Infiniium real time oscilloscopes.
|
|
|
17/01/2012
Mouser Electronics today announced the availability of Murata's AMR (Anisotropic Magneto Resistance) Magnetic Switch Sensors. These robust switch sensors, which are being featured by Murata at this week's CES event in Las Vegas, set a new standard for reliability, sensitivity, and detection area.
|
|
|
07/12/2011
Anritsu's new option supports synchronous ethernet testing from 10 to 10Mb/s. Test of the two techniques that defined for Ethernet synchronisation are supported:
* Physical synchronisation signal forwarding as defined in ITU-T recommendations G.8261, G.8262 and G.8264 (in many cases this is now called SyncE)
* Protocol based synchronisation as defined in IEEE1588 v2 Precision Time Protocol (PTP)
|
|
|
17/11/2011
Agilent Technologies has released SystemVue 2011.10, the latest update to the design environment for wireless physical layer architects.
|
|
|
27/09/2011
Analog Devices has announced the ADIS16228 mems based Sensor vibration monitor.
|
|
|
21/09/2011
National Instruments has released NI VeriStand 2011, the latest version of its configuration based software environment for creating real time testing and simulation applications including hardware in the loop (HIL) simulators and test cells.
|
|
|
12/09/2011
JTAG Technologies has released a new JTAG/boundary scan hardware interface product compatible with the MAC Panel SCOUT mass interconnect system.
|
|
|
07/09/2011
Goepel electronic has introduced two new Jtag digital I/O modules on PXI bus basis. The PXI5396-DT/x devices support structural Jtag/boundary scan tests as well as dynamic I/O operations up to 100MHz for functional test executions.
|
|
|
01/09/2011
Agilent Technologies has introduced the enhanced Agilent U8903A audio analyser with new digital audio interface options.
|
|
|
26/08/2011
Sensirion has launched two new versions of its differential pressure sensors within the SDP600 series.
|
|
|
15/08/2011
Anritsu has announced the launch of its new MD1260A-005/006/007 software options, which feature support for OTU4 mapping, as well as strengthening functions for its MD1260A 40/100G Ethernet analyser.
|
|
|
08/08/2011
Aim-TTi has extended its CPX400 series of PowerFlex regulated laboratory power supplies with the addition of new single output models.
|
|
|
06/07/2011
Swiss sensor manufacturer Sensirion has launched a new flow sensor for flow rates below 2cc/s (120 ml/min) with hydrocarbon based liquids such as photoresists and solvents.
|
|
|
16/06/2011
Agilent Technologies has announced the first modular AXIe embedded controller – the Agilent M9536A, a one slot module that can be used to build compact AXIe systems.
|
|
|
14/06/2011
In a bid to tackle increasing demands for faster digital communications systems, Anritsu has developed two new modules that support both jitter tolerance tests and the generation of emphasis signals.
|
|
|
08/06/2011
Anritsu's ME7838A broadband vector network analyser (VNA) system is designed to provide single sweep coverage from 70kHz to 110GHz with operation from 40kHz to 125GHz.
|
|
|
08/06/2011
Analog Devices has introduced a new 10DoF inertial measurement unit.
|
|
|
27/05/2011
Recom has extended its product family of isolated ac/dc power modules with fully regulated single or dual outputs suitable for applications with low power or standby function.
|
|
|
24/05/2011
The ZNB and ZNC from Rohde & Schwarz are said to represent a new generation of vector network analyser, set to meet demanding applications in the production and development of rf components.
|
|
|
13/05/2011
A new programme analysis engine designed to identify data race conditions and other concurrency defects has been introduced by GrammaTech.
|