comment on this article

Euroquartz launches new range of oscillators

Frequency control specialist, Euroquartz has launched a new range of oscillators from Statek offering ultra-low power, fast start-up and high shock resistance characteristics in a surface-mount package measuring just 3.2 x 1.5 x 0.95mm.

The CXOLHG features frequency output of 32.768kHz and achieves typical low power consumption of 1µA at 3.3V supply voltage. This is comparable with a tuning fork design while fast start-up time of 3ms typical and tight frequency stability are as good as those obtainable with AT-cut crystal designs. The oscillator is also capable of withstanding shock up to 30,000g and above, significantly higher than that achieved by tuning fork designs.

With full military testing available, the CXOLHG oscillator also offers low acceleration sensitivity, typically 0.5ppb/g, essential in aerospace applications.

Specifications include supply voltage range from 1.8 to 3.3V, calibration tolerance of ±25ppm, output load (CMOS) of 15pF and ageing of ±3ppm in first year. Frequency stability is ±10 to ±50ppm over commercial temperature range (0 to +70°C), ±20 to ±50ppm over industrial temperature range from -40 to +85°C, and ±35 to ±50ppm over military temperature range from -55 to +125°C. Shock options encompass 30,000, 50,000, 75,000 and 100,000g (0.3ms, ½ sine) while vibration survival is 20g, 10 to 2000Hz, swept sine.

The oscillators are hermetically sealed in 4-pad housings and not sensitive to moisture. Maximum process temperature is 260°C for 20 seconds.

There are two Enable/Disable options available: E which stops oscillation when the output is put into the high Z state and N which does not have enable/disable pad connected internally.

The CXOLHG oscillators are available either in tray packs (up to 250 pieces) or 12mm tape and 178 or 330mm reels (EIA418) for more than 250 pieces.

Author
Neil Tyler

Comment on this article


This material is protected by MA Business copyright See Terms and Conditions. One-off usage is permitted but bulk copying is not. For multiple copies contact the sales team.

What you think about this article:


Add your comments

Name
 
Email
 
Comments
 

Your comments/feedback may be edited prior to publishing. Not all entries will be published.
Please view our Terms and Conditions before leaving a comment.

Related Articles

Living with lithium

Batteries play a key role in a range of applications and are used in medical ...

Easy as Pi

Sony Corporation’s electronics manufacturing arm, based in Wales, is pioneering ...

What is EMC testing?

Testing of products under EU guidelines to ensure they don't either pollute the ...

DAQ µModule

Analog Devices (ADI) has introduced a 16-bit, 15 MSPS data acquisition mModule ...

Thermal Jumper chips

New Yorker Electronics has released and is now stocking Vishay’s ThermaWick ...

Circuit protection

Circuit protection is designed as an intentional weak link which can combat ...

Avoid epic failure

Consumers expect today's electronics to be faster, smaller and highly reliable. ...

Ensuring security

Silicon Labs’ CSO, Sharon Hagi, talks to Neil Tyler about security and product ...

Carrying the day

The Queen Elizabeth Class carriers are intended to provide the UK’s armed ...