comment on this article

Dual 10A, single 20A ultrathin µModule regulator from Analog Devices

Analog Devices has unveiled the Power by Linear LTM4686, a dual 10A or single 20A ultrathin step-down µModule regulator with a PMBus interface.

Housed in a 16mm x 11.9mm x 1.82mm LGA package the LTM4686 can be placed on a PC board very close to its load such as an FPGA or ASIC, while sharing one heat sink covering both low-profile packages.

The ultrathin package has been designed to allow the LTM4686 to be mounted on the backside of a PCB, freeing topside space for components such as memory and transceiver ICs. This makes the LTM4686 suitable for height-restricted applications such as rack-mounted telecom switches and routers, raid systems, and test and measurement equipment.

The PMBus interface enables users to measure and alter key power parameters such as voltage, load current and temperature. Users can also program sequencing, fault thresholds and responses via PMBus, storing values and fault log data in the onboard EEPROM.

The LTM4686 operates from 4.5V to 17V and the LTM4686-1 from 2.375V to 17V input supplies. These modules regulate an output from 0.5V to 3.6V with ±0.5% maximum DC output error over temperature̶ 40°C to 125°C.They deliver 80% efficiency at 12VIN to 1.0VOUT at a full load condition. The LTM4686 can deliver 18A from a 5VIN to a 1VOUT at 85°C ambient with 400LFM air flow.

Current mode control enable operation in a parallel configuration, to deliver increased output current. Its internal switching frequency is settable from 250kHz to 1MHz and can be synchronised to an external clock from 250kHz to 1MHz for noise-sensitive applications.

The LTM4686 configurable offers protection features, including overvoltage and under-voltage, overcurrent and overtemperature. If a fault occurs, data is saved automatically to the EEPROM, and the fault log can be retrieved over an I2C interface, where it can then be analysed.

To evaluate the performance of the LTM4686, the LTpowerPlay GUI DC1613 USB-to-PMBus converter VDC2086 programming adapter and demo kits are available.

Neil Tyler

Comment on this article

This material is protected by MA Business copyright See Terms and Conditions. One-off usage is permitted but bulk copying is not. For multiple copies contact the sales team.

What you think about this article:

Add your comments


Your comments/feedback may be edited prior to publishing. Not all entries will be published.
Please view our Terms and Conditions before leaving a comment.

Related Articles