comment on this article

What is the usable power in a DC/DC converter?

The term ‘high usable power’ is widely used by the manufacturers of DC/DC converters to describe their product’s performance. Many engineers though tend to focus on the datasheet’s rated current and assume that, by selecting a more expensive, higher power converter, it will give them more derating and improved reliability.

To determine which converter is best suited for your application, a number of steps have to be taken in addition to determining the input and output voltage.

Looking at the industry standard quarter brick, it is obvious from the construction, even with an integral baseplate and some heat conduction to the card it is mounted on, the converter will need some airflow, a heatsink, or both. Cold plate is not usually available in most applications.

Fortunately, most manufacturers do a very good job of providing a host of curves and their specified test methods. Below are the curves for TDK-Lambda’s iQG 500W DC/DC converter against various airflow rates and the test method.

The test method simulates vertically mounted cards in telecom and datacom cabinets.

How does this relate to our original subject regarding usable power? Below is a simplified pair of curves for 2m/s airflow.The blue line is for an 800W 12V 67A DC/DC converter, and the green line for our 500W 12V 42A converter. Even though the 800W model is 1.6 times more powerful at low ambient temperatures, in the yellow area at higher ambients, the ratio drops to 1.35 times at 70°C and 1.24 times at 85°C. Typically customers operate DC/DC converters in the 65 to 80°C range.

Although the 800W converter has more available power, the 500W unit has more usable power (as a percentage of its rated power), demonstrated by a much less steep derating curve. It can be seen that at higher ambient temperatures, it would be more cost effective to use the 500W converter.

TDK-Lambda UK

Comment on this article

This material is protected by MA Business copyright See Terms and Conditions. One-off usage is permitted but bulk copying is not. For multiple copies contact the sales team.

What you think about this article:

Add your comments


Your comments/feedback may be edited prior to publishing. Not all entries will be published.
Please view our Terms and Conditions before leaving a comment.

Related Articles

Arrow camera modules

Arrow Electronics has introduced a family of plug-and-play camera modules based ...

Early detection

A length-unlimited flexible printed circuit technology is enabling a robust, ...

Smart construction

For an industry that accounts for 6% GDP worldwide, construction players have ...

Get to market faster

A quick look at using Vicor's PFM and AIM in VIA packaging for your AC to Point ...

World IoT Day

ByteSnap Design, a specialist in embedded systems design and development, has ...

Improving cancer care

Mirada Medical’s imaging technology is helping to accelerate cancer care by ...