comment on this article

Ultra-wide, Ultra-high Input Voltage, Isolated DC Converters for New Energy Applications

Global power conversion manufacturer MORNSUN is pleased to announce the launch of a new DC converter series that features an Ultra-wide, Ultra-high input voltage range for use in a wide range of new energy applications.
The single output PV200-27Bxx series provides an output of 200W and feature an input range of 250 – 1000V DC with typical efficiency of 87% at 600V DC input.

Global power conversion manufacturer MORNSUN is pleased to announce the launch of a new DC converter series with an Ultra-wide, Ultra-high input voltage range.

The single output PV200-27Bxx series provide an output of 200W and feature an input range of 250 – 1000V DC with a typical efficiency of 87% at 600V DC input. The input has inbuilt under voltage protection, reverse input voltage protection and input to output isolation of 4000 V AC minimum.

This range provides single outputs of 24V, 26V and 48V with output voltage accuracy of typically ±2%, line regulation (full load) of ±0.5% and load regulation (0 – 100%) of ±2%. The output is fully protected with continuous, self-recovering (hiccup mode) short circuit protection, self-recovering over-current protection and over-voltage protection. They have ripple and noise (20Mhz Bandwidth) of 200mV maximum and feature a minimum load of 0%. They feature a hold up time of 8mS (600V input) and 20mS (1000 input) at room temperature with full load.

These converters meet latest safety and EMC requirements with safety to EN62109 and conducted and radiated emissions to EN55032 class A. They also meet the electromagnetic susceptibility requirements of EN61000-4-2, -4-3, -4-4, -4-5 and -4-6.

These specialised converters are housed in a metal case with a wide operating temperature range of -40°C to +70°C, they are cooled by free air convection. The case dimensions are 168 x 121.35 x 42.5mm and the typical weight is 1000 grams. They provide high reliability with an MTBF of greater than 300K Hr’s to MIL-HDBK 217F at 25°C.

This series is specifically suited for use in new energy applications including photovoltaic power generation, stored energy and high voltage frequency conversion. The output can be readily paired with other MORNSUN DC converters to provide the multiple power rails that may be used in an application.

Author
Mornsun Guangzhou Science & Technology Co Ltd

Comment on this article


This material is protected by MA Business copyright See Terms and Conditions. One-off usage is permitted but bulk copying is not. For multiple copies contact the sales team.

What you think about this article:


Add your comments

Name
 
Email
 
Comments
 

Your comments/feedback may be edited prior to publishing. Not all entries will be published.
Please view our Terms and Conditions before leaving a comment.

Related Articles