23/09/2020
With a highly integrated design for maximising optical design flexibility with full programmability. Ultra-low power operation extends the battery life for portable/wearable applications and bio-potential and bio-impedance measurement enables multi-parameter capability.
|
|
20/05/2020
Featuring inertial sensors combined with signal conditioning to optimize dynamic performance.Including a triaxial gyroscope and a triaxial accelerometer. Programmable operation with automatic and manual bias correction controls. Simple data collection via SPI.
|
|
26/02/2020
Bidirectional 100V Buck/Boost controller with compensation network
|
|
12/06/2019
Texas Instruments TMUX6136 ±16.5V Dual SPDT Switch offers a CMOS analog output containing two independently selectable SPDT switches. This switch offers very low leakage current and charge injection and provides a low supply current of 17µA enabling usage in portable applications. The TMUX6136 was designed to work with dual supplies (±5V to ±16.5V), a single supply (10V to 16.5V), or asymmetric supplies.
|
|
19/03/2019
Texas Instruments TMP1075 I2C Temperature Sensors are available in SOIC-8 and VSSOP-8 packages and offer pin-to-pin and software compatibility to quickly upgrade any existing xx75 design. The TMP1075 provides a 30% improvement in accuracy over standard xx75 temperature sensors and offers an on-chip 12-bit analog-to-digital converter (ADC) providing a temperature resolution of 0.0625°C.
|
|
03/01/2019
Get fast, quality measurements without a large data acquisition (DAQ) mainframe system. Read tips about how to select the right hardware and how to configure it to increase your reading speed. Optimize your DAQ system for throughput, scanning speed, and accuracy with help from this white paper.
|
|
15/10/2018
Global power supply manufacturer Mornsun has increased the application range of its successful non-isolated Switching Regulator series with the introduction of the 2A rated K78xx-2000R3 product range. These new switching regulators feature an ultra-wide input range of 6-36VDC with outputs of 3.3, 5, 9, 12 and 15V DC.
|
|
15/10/2018
Texas Instruments DRV3245Q-Q1 Gate Driver Unit (GDU) is designed according to the applicable requirements of ISO 26262 for functional safety applications. The device provides three half-bridge drivers each capable of driving a high-side and low-side N-channel MOSFET while also providing sophisticated protection and monitoring of the FETs. A charge-pump driver enables 100% duty cycle and supports low battery voltages during cold-crank operation.
|
|
12/10/2018
Commended for its work in encouraging increased interest in engineering and promoting the uptake in STEM subjects, AESSEAL, specialist in the design and manufacture of mechanical seals and support systems, took home this year’s title of Grand Prix winner at the BEEAs ceremony.
|
|
12/10/2018
Help us to understand your power product requirements and as a thank you for taking part, we will enter your name into a prize draw to win a £100 Amazon Voucher!
|
|
12/06/2018
As technology evolves, choosing the best way to keep pace depends on the capability of your test assets. Keysight can help with Technology Refresh Services ranging from advisory consulting to equipment trade-ins. Explore the possibilities in our eBook: it describes ways to evaluate trade-offs and manage choices.
|
|
09/06/2018
Texas Instruments TPSM84824EVM-013 Power Module Evaluation Board is configured for easy evaluation of the TPSM84824 power module. The TPSM84824 Power Module offers current up to 8.0A and an input voltage range of 4.5V to 17V in a compact package.
|
|
06/06/2018
Coherent optical transmission techniques have become the standard in fiber optical backbone networks. They come with new requirements along the whole communication link from the transmitter, through fiber cable and network elements to the receiver to be safe against signal distortions and link impairments. Learn what you need to consider.
|
|
01/06/2018
Whether you have already started, or are planning to start your entry, you now have until Friday 29th June to put together an award-winning submission for the British Engineering Excellence Awards (BEEAs). Don’t miss out on your moment in the spotlight!
|
|
14/03/2018
The new NB-IoT radio technology will power growth in the Internet of Things and enable a variety of applications ranging from wearables to connected cities. Ensuring ongoing performance requires rigorous testing. Explore design challenges and discover how Keysight can address the entire NB-IoT development cycle. Check out our new infographic.
|
|
11/03/2018
Tony Folan, senior field application engineer of Altium UK, will be delivering a free-to-attend seminar at PCB Design & Manufacturing Live, held at the National Motorcycle Museum on 10 May, titled ‘Conquering multi-board design challenges to create next-generation electronics’.
|
|
10/01/2018
Space is expensive, especially in data centers and telecommunication rooms of telecom companies. High costs call for optimum usage with high density solutions. At the same time, connections have to be robust, reliable and easy to handle. And as there is a constant change in IT technologies, the cabling has to be highly flexible to allow efficient technology changes.
|
|
10/10/2017
Download National Instruments white paper to learn more about various capabilities of wideband IF digitizers with built-in FPGA chips in the context of RF signal streaming. Topics include wideband signal streaming, variable burst signal recording and narrowband signal monitoring.
|
|
02/10/2017
EDS, comprising the Engineering, Electronics and Embedded Design Shows, is the UK's largest exhibition and conference entirely dedicated to the design engineering community. From 18-19th October at the Ricoh Arena, Coventry, discover new supply chain possibilities from 220+ exhibitors, and attend keynote presentations offering powerful content on advanced design engineering techniques.
|
|
13/06/2017
The brand new Yokogawa DL350 ScopeCorder is the most comprehensive fully portable measuring instrument available for capturing, displaying, recording and analyzing a wide variety of electrical and physical parameters in industry sectors including automotive, electronics, energy, transport and mechatronics. It provides laboratory class DAQ performance in the field!
|
|
13/06/2017
Available from leading UK Power Conversion distributor PowerPax, Mornsuns’ TD301MCAN/TD501MCAN and TD301MCANFD/TD501MCANFD CAN transceiver modules combine the CAN transceiver, signal isolation and bus protection in a compact package measuring 12.7 x 10.16 x 8.2mm. This integrated solution simplifies system design and makes for ease of application.
|
|
13/03/2017
National Instruments PXI oscilloscopes feature an open architecture and flexible, software-defined functionality to deliver unmatched versatility for both time- and frequency-domain applications. With an NI PXI oscilloscope, you get the out-of-the-box experience of a box instrument with a platform to support modern technology with both the measurement and channel capability to meet the changing needs of test and measurement.
Learn how PXI oscilloscopes are built for test.
|
|
13/03/2017
Engineering is all about connecting ideas and solving problems, and every tool you master enhances your ability to contribute. Explore Keysight Signal Analysis Basics, our classic application note that’s current with the latest technologies and techniques across the time, frequency and modulation domains. Count on Keysight to help you build a stronger foundation and inspire your next breakthrough. Get the app note.
|
|
09/01/2017
Telegärtner "TestLine" is a comprehensive product programme for various measuring and test jobs, including production tests, laboratory measurements and field measurements. High quality RF test cables which meet the highest demands regarding attenuation, phase stability and life endurance are an essential part of this product line.
|
|
03/01/2017
The “Flow Sensing in Tankless Water Heaters” application note from Littelfuse offers insights on flow switch and flow sensors suitable for on-demand hot water systems. The note illustrates flow switch and sensor operation, lists suggested components, and highlights complementary Littelfuse circuit protection and power control products. Download a free copy.
|