25/09/2019
RDS will be bringing together their latest display technologies and embedded solutions on stand no. F6 at EDS 2019 with a focus on AI Vision Systems and IoT technologies. Their stand will display their innovative design approach and manufacturing capabilities for IoT platforms and devices, together with their team of experts who will be on hand to discuss its full range of products and technologies
|
|
|
25/09/2019
Omron Electronic Components Europe will be demonstrating new MEMS based sensor solutions for building automation, digital signage and other environmental monitoring applications at EDS on the 16th and 17th of October in Ricoh Arena, Coventry.
|
|
|
24/09/2019
Choosing the right module for your design is a vital and often complicated process. Narrowing the selection down from the thousands available takes time and patience, especially as new innovations are constantly being released.
|
|
|
19/09/2019
Visit Phoenix Contact at the Engineering Design Show, stand M18 to discover innovative connection technology for a smart world.
|
|
|
13/09/2019
New from RDS is the TechNexion AXON product family which consists of small form factor (58 x 37mm) modules designed for specialized embedded applications requiring extra I/O flexibility. Powered by the NXP i.MX6 cortex-A9 processor they have the AXON Fabric Logic built in. This is a specialized IC that allows additional functions including nearly infinite pinmuxing for true pin to pin compatibility between SoC versions. It has a system memory of up to 2GB DDR3, eMMC storage of 8GB, Gigabit LAN and TTL/Dual LVDS/HDMI/MIPI interfaces. Wi-Fi Bluetooth, Qualcomm QCA9377 is optional.
|
|
|
13/09/2019
It is necessary for all products exposed to a potentially hazardous environment to be ATEX certified. To be ATEX certified, you must isolate one side of the fire triangle. Oxygen, heat or fuel.
Display Technology can remove the oxygen risk with their optical bonding solution, Vacubond.
Vacubond enables void exclusion bonding to reduce the amount of oxygen within an industrial display.
|
|
|
20/08/2019
Linear Technology/Analog Devices LTC6228 High-Speed Operational Amplifiers offer a high slew rate of 500V/µs and are the perfect choice for wide dynamic range applications due to the combination of low offset, low offset drift, high CMRR, and high gain. The LTC6228 operational amplifiers consist of an input range extending to the negative rail and an output range that encompasses the entire supply range.
|
|
|
22/07/2019
The COMSOL Conference brings the simulation community together to discuss & exchange best practices around the use of numerical simulation and mathematical modelling. Simulation experts from leading organisations across industries share how multiphysics transformed their work. Draw inspiration for your next design innovation from leaders in multiphysics simulation and join peers in Cambridge.
|
|
|
12/11/2018
Best-in-class ARM processor in application friendly shape, the SMARC 2.0 Computer-on-Module is based on the 64-bit NXP i.MX8 multi-core ARM family. The ARM Cortex-A53/A72 module represents the flagship for ultra-low-power embedded computer designs, offering the recent best-in-class ARM with excellent performance, flexible graphics and numerous embedded features.
|
|
|
01/10/2018
At EDS RDS will be bringing together display technologies and embedded solutions. Design and manufacture is what we do. We have over 30 years’ experience with display technologies, embedded computing boards and bespoke system design. We can design and build complete systems providing you with a turnkey solution on time and on budget.
|
|
|
01/10/2018
Finding expert resources for niche optoelectronic design and assembly is challenging - there are very few UK companies with the right skills and experience to tackle such demanding requirements. Pacer is well positioned to offer OEMs a cost-effective outsourcing option for projects involving photonics, optics, sensing or displays.
|
|
|
30/09/2018
The latest COM standard, SMARC, delivers a versatile, small form factor for computer-on-modules. It is suited to applications needing low energy consumption, a low profile, low cost and high performance. Typically, the computer-on-modules use both ARM and x86 SoCs, similar to those used in tablet PCs or smart phones. The maximum electrical power consumption of the module is designed for passive cooling applications.
|
|
|
18/09/2018
Samtec offers the largest variety of board-to-board interconnects in the industry and no-one understands Samtec better than Toby. Offering 3D model downloads, data, live pricing, lead time information, sample support and expert technical advice, toby.co.uk is the vital component for Samtec Interconnection.
|
|
|
18/09/2018
The X-Ware IoT Platform® provides fast, safe, and secure industrial-grade connectivity for deeply embedded IoT sensors, devices, edge routers, and gateways. The X-Ware IoT Platform is built on top of Express Logic’s high-performance ThreadX® RTOS and NetX Duo™ dual IPv4/IPv6 TCP/IP stack.
|
|
|
18/09/2018
Bivocom is a leading solution provider of industrial wireless transmission terminals for IoT and M2M.
The company manufactures high quality NB-IOT, 4G/3G/2G industrial wireless modems, DTU, Gateway, Router and Android IPC, which are widely used within smart grid, smart city, oil and gas, irrigation, intelligent transportation, kiosk and vending, mining, agricultural monitoring and industrial automation applications.
|
|
|
10/09/2018
Toshiba TB622x Bipolar Stepping Motor Drivers utilize a PWM chopper, are rated at 40V/1.8A and are fabricated with the Bipolar CMOS DMOS (BiCD) process. The on-chip voltage regulator controls the stepping motor with a single VM power supply. The TB622x family also features low on-resistance at the output stage and Thermal Shutdown (TSD).
|
|
|
19/07/2018
Vishay / BC Components MAL2225 Ruggedized Electrical Double Layer Energy Storage Capacitors are ruggedized for high humidity operation and provide rapid charge and discharge. These Vishay / BC Components capacitors feature 2.7V rated voltage and 20F to 60F rated capacitance. Applications include power backup, burst power support, storage devices for energy harvesting, and more.
|
|
|
18/07/2018
EDS is the only event in the UK entirely dedicated to electronics, engineering, and embedded design. EDS returns to the Ricoh Arena, Coventry on 17-18 October and is now open for you to secure your free ticket. Take a day out to visit the show, where you can get hands-on with the latest design tools, hear from world-class speakers, meet supply-chain partners and learn new design skills and techniques, all under one roof.
|
|
|
26/04/2018
Components Bureau introduces a new line of AEC-Q200 qualified surface-mount fuses designed specifically for reliable operation in high-stress automotive applications. AEM manufacturers the wire-in-air AirMatrix (QA Series) and solid body SolidMatrix (QF Series) fuses in its TS16949-certified facility. Both products offer automotive design engineers reliable performance in applications ranging from engine controls and battery-management systems to infotainment and communications systems.
|
|
|
23/04/2018
The latest single output LDE and LHE AC/DC modules from MORNSUN provide improvements in performance, size and cost. These AC/DC modules cover a power range of 3W to 25W with output voltages of 3.3V – 24V, suitable for various applications including instrumentation and metering, industrial control, telecommunications and IOT devices.
|
|
|
04/12/2017
The Engineering Design Shows 2017 drew to a close on Thursday 19th October with positive feedback from exhibitors and visitors. Running from 18-19 October at the Ricoh Arena, Coventry, the shows brought together more than 4000 design engineering professionals to the showcase of British design innovation.
|
|
|
14/11/2017
Littelfuse SP3530 0.3pF 22kV Unidirectional Automotive TVS Diodes are fabricated in a proprietary silicon avalanche technology that provides a high level of ESD protection. The SP3530 series safely absorbs repetitive ESD strikes above the maximum level specified in the IEC 61000-4-2 international standard (±8kV contact discharge) without performance degradation.
|
|
|
02/10/2017
Design and manufacture is what we do. Review Display Systems has over thirty years’ experience in dealing with the specialist needs of engineers and designers requiring displays, touch panels and embedded hardware solutions. Representing the world’s leading manufacturers of LCD, TFT, EL, OLED, E-INK display technologies, touch screen solutions and embedded industrial single board computer providers ensures the best possible technical and commercial solution to any system requirement.
|
|
|
02/10/2017
The Cervoz range of industrial Flash & DRAM modules will be on show for the first time in the UK at the Electronics Design Show.
|
|
|
02/10/2017
binder will be showcasing its complete range of connectors including its innovative industrial connectors and market leading sensor connectors on stand M12 at EDS 2017. Featured products will include a key addition to its M5 sensor connector portfolio. The smallest sensor connector available now features shielded and overmoulded versions.
|