comment on this article

Dual 13A or Single 26A DC/DC µModule Step-Down Regulator Can Deliver up to 100A

The LTM4620 from Linear Technology is a complete dual 13A output switching mode DC/DC power supply that includes in the package the switching controller, power FETs, inductors and all supporting components. Operating from an input voltage range of 4.5V to 16V, the LTM4620 supports two outputs each with an output voltage range of 0.6V to 2.5V, set by a single external resistor. Its high efficiency design delivers up to 13A continuous current for each output and can deliver up to 100A when four devices are current shared. Only a few input and output capacitors are needed.


In conjunction with Arrow Electronics.

The LTM4620 from Linear Technology is a dual 13A per output or single 26A output DC/DC µModule step-down regulator that delivers up to 100A when four devices are current shared.

This device is a complete DC/DC regulator system in a 15mm x 15mm x 4.41mm LGA package that includes inductors, power stages and all control circuits.

For optimum heat dissipation, a patented top side heat sink removes heat quickly and evenly. With 200LFM air flow, 12VIN to 1.0VOUT and at full load of 26A (or 13A per output), the LTM4620 internal temperature rises only 60°C above ambient.

With the addition of an external heat sink to the top of the package and 200LFM air flow, the temperature rise is only 40°C. See our TechClip video at http://video.linear.com/p4634 for a performance demonstration.

The LTM4620 is designed to convert 5V to 12V inputs to high power, low voltage point-of-load system rails such as 2.5V to as low as 0.6V. An accurate reference and an internal remote sense amplifier guarantee +/-1.5% accurate output regulation over line, load and temperature. Sensing the voltage at the load compensates for voltage drops caused by PCB trace impedance.

Excellent heat dissipation, low temperature rise, scalable and high output power capability, small footprint and the low profile package of the LTM4620 enable system designers to lay out more densely populated boards. Applications include mezzanine boards such as ATCA and microTCA systems, point-of-load regulation for advanced processors, ASICs and recently introduced 28nm FPGAs as well as high-speed SERDES.

The LTM4620 features fast short-circuit protection where a current foldback technique reduces IOUT to a minimum, preventing the µModule regulator from overheating while protecting the load as well as the upstream power supply. Once the short-circuit condition is removed, the LTM4620 resumes operation (see TechClip video demonstration http://video.linear.com/p4634).

The two outputs of the LTM4620 operate at 180° out of phase to minimize output ripple (when outputs share current) and input ripple, resulting in the use of fewer and smaller capacitors. For a 100A design, four LTM4620 devices accurately current share and operate at 90° out of phase.

The LTM4620 is rated for operation from -40°C to 125°C. 1,000-piece pricing starts at $29.99 each.

For more information, visit www.linear.com/product/LTM4620.

Author
Linear Technology (UK) Limited

Comment on this article


This material is protected by MA Business copyright See Terms and Conditions. One-off usage is permitted but bulk copying is not. For multiple copies contact the sales team.

What you think about this article:


Add your comments

Name
 
Email
 
Comments
 

Your comments/feedback may be edited prior to publishing. Not all entries will be published.
Please view our Terms and Conditions before leaving a comment.

Related Articles