comment on this article

New Time Limited Yokogawa Scope and Probe Bundle Offer

Here's the special offer for New Electronics Spotlight readers - Buy a Yokogawa DLM4000 8-channel mixed-signal oscilloscope and get 35% discount on a bundle of 3 to 4 high voltage differential probes AND 3 to 4 current probes. Hurry, the promotion is only valid until end of August!
Read more about the unique DLM4000 and check out the bundle offer now.

Yokogawa enhances DLM4000 8-channel mixed-signal oscilloscope with additional channels and new firmware

- New options and upgrades improve logic analysis, power and serial-bus measurement capabilities -

A number of new enhancements have been introduced to the Yokogawa DLM4000 Series of 8-channel mixed-signal oscilloscopes. These include the L16 option, which adds 16 extra channels of logic, plus upgraded firmware for power measurements and serial-bus testing.

Launched in October 2012, the new Yokogawa DLM4000 is the industry's first mixed-signal oscilloscope to feature eight channels. Combining the large screen and 8-channel capability of Yokogawa's earlier 8-channel DL7480 oscilloscope with the mixed-signal technology of the company's pioneering DLM2000 Series, the instrument is ideally suited to test and debugging applications in the embedded systems, power electronics, mechatronics and automotive sectors.

The eight channels on the original instrument could be allocated as eight analogue channels or seven analogue channels plus one 8-bit digital input. The new L16 option adds 16 more channels of logic to give seven channels of analogue plus a 24-bit digital input, allowing more detailed analysis of embedded electronics and serial-bus based systems.

Upgraded firmware on the /G4 option for power measurements gives the DLM4000 enhanced power capabilities in line with the Yokogawa family of precision power analysers. In particular, the oscilloscope can be used as a fully featured 3-phase power meter, with the eight channels allowing voltages and currents to be individually measured and displayed alongside derived values. With this option, the instrument offers automated measurement of power parameters for up to four pairs of voltage and current waveforms. These values can then be statistically processed and calculated to provide peak, average and root-mean-square values, along with many other parameters such as power factor and q-factor.

On the /F1 to /F6 options for serial-bus testing, new firmware doubles the number of buses that can be simultaneously tested. It now becomes possible to test four CAN, LIN or I2C buses or two SPI buses plus one other such as a UART interface. Exploiting the full 8-channel capability of the DLM4000 allows more combinations of buses to be tested, and adding the dual-zoom facility means that different buses can be viewed and debugged alongside one another.

The DLM4000 Series comprises two models, with bandwidths of 350 and 500 MHz and a sampling rate of 1.25 GS/s (gigasamples per second), expandable to 2.5 GS/s with interleaving. The instruments feature exceptionally long memory (up to 125 M points), allowing both long recordings and multiple waveforms to be acquired. A history memory function allows up to 20,000 previously captured waveforms to be saved in the acquisition memory, with any one or all of them displayed on screen for cursor measurements to be carried out. Waveforms can be displayed one at a time, in order, or automatically played back, paused, fast-forwarded or rewound.

The enhanced DLM4000 is the latest addition to the world-class range of oscilloscopes from Yokogawa, which also includes the compact DLM2000 series and the ScopeCorder, which combines the benefits of both a digital oscilloscope and a multi-channel data recorder. The addition of enhanced power measurement to the DLM4000 also complements Yokogawa's leading range of precision power meters and analysers and enables the company to provide an appropriate power measurement solution for all stages of the product development, validation and test process.

Here's the special offer for New Electronics Spotlight readers - Buy a Yokogawa DLM4000 8-channel mixed-signal oscilloscope and get 35% discount on a bundle of 3 to 4 high voltage differential probes AND 3 to 4 current probes. Act today, the promotion is only valid until end of August!

For more product information at

Yokogawa Measurement Technologies Ltd

Comment on this article

This material is protected by MA Business copyright See Terms and Conditions. One-off usage is permitted but bulk copying is not. For multiple copies contact the sales team.

What you think about this article:

Add your comments


Your comments/feedback may be edited prior to publishing. Not all entries will be published.
Please view our Terms and Conditions before leaving a comment.

Related Articles

Lab on the Cloud

Renesas Electronics has expanded its Lab on the Cloud environment to simplify ...

One small step…

Stan Boland, CEO of Five, a leading UK self-driving start-up, talks about the ...

Change based testing

A major cause of software bugs is inefficient and incomplete testing. This ...

What is EMC testing?

Testing of products under EU guidelines to ensure they don't either pollute the ...

NI Trend Watch 2014

This report from National Instruments summarises the latest trends in the ...

DAQ µModule

Analog Devices (ADI) has introduced a 16-bit, 15 MSPS data acquisition mModule ...

T&M challenges

An interesting piece of research from Keysight Technologies shows that nearly ...

Finding its voice

The National Physical Laboratory (NPL) is the UK’s National Measurement ...