comment on this article

Automotive Hybrid Power Trains

Avago Technologies industrial solutions are used in hybrid vehicle drive train control systems. Avago products cover a number of the elements of motor control systems including current sensing and control of the motor, and communications interfaces that couple the motor control logic to other parts of system.

Automotive Miniature Isolation Amplifier
The automotive isolation amplifier uses S-? architecture where the differential analog input is converted into digital pulses to be transmitted optically across the insulation barrier. The isolation amplifier allows designers to sense current/voltage in extremely moisy environments while maintaining excellent gain and offset accuracy. It exhibits outstanding stability over both time and temperature, as well as unequaled common-mode transient noise rejection (CMR). The small input voltage range helps minimize power dissipation in the current-sensing resistor (current shunt), thus making it suitabole for many voltage-sensing automotive applications. Avago R2Coupler provides with reinforced insulation and reliability that delivers safe signal isolation critical in automotive and high temperature industrial applications.
http://www.avagotech.com/pages/en/optocouplers_plastic/plastic_automotive_optocoupler/automotive_miniature_isolation_amplifier


Automotive Digital Optocoupler
Designed to meet digital CANBus interface speed of up to 1Mbps with propagation delay of maximum 100ns. It helps to provide adequate overall CANBus system latency. In addition this R2CouplerTM is qualified to AEC-Q100 test guidelines and operates at -40oC to 125oC suitable for today's hybrid electric vehicle applications. Avago R2Coupler provides with reinforced insulation and reliability that delivers safe signal isolation critical in automotive and high temperature industrial applications
http://www.avagotech.com/pages/en/optocouplers_plastic/plastic_automotive_optocoupler/automotive_digital_optocoupler/


Automotive Integrated Gate Drive Optocouplers
Avago's gate drive R2Couplers are ideally suitable for driving power IGBTs and MOSFETs used in motor control inverter applications. The voltage and current supplied by these optocouplers are suitable for direct driving IGBTs with ratings up to 1200 V/100 A. The R2Coupler have integrated features such as UVLO, fault status feedback, desaturation detection and IGBT soft shut down that protect the power devices during fault conditions. The R2Coupler are qualified according to AEC-Q100 test guidelines, operate at -40oC to 125oC, and are suitable for hybrid electric vehicle applications. Avago R2Coupler provide reinforced insulation and reliability, and deliver safe signal isolation, that is critical in all automotive and high temperature industrial applications.
http://www.avagotech.com/pages/en/optocouplers_plastic/plastic_automotive_optocoupler/automotive_integrated_gate_drive_optocouplers/

Author
Avago

Comment on this article


This material is protected by MA Business copyright See Terms and Conditions. One-off usage is permitted but bulk copying is not. For multiple copies contact the sales team.

What you think about this article:


Add your comments

Name
 
Email
 
Comments
 

Your comments/feedback may be edited prior to publishing. Not all entries will be published.
Please view our Terms and Conditions before leaving a comment.

Related Articles