comment on this article

A roadmap for energy storage on board armoured vehicle

Ori Kost

The outlook for the future battlefield has changed dramatically during the last decade, impacting among others the requirements from armoured vehicles, as Ori Kost explains.

Today’s tanks and personnel carriers are expected to be highly mobile, easily manoeuvrable, have extended operational ranges, carry sophisticated optical equipment and provide superior protection.

Current armoured vehicles carry with them advanced C4I (Command, Control, Communications, Computers & Intelligence) systems. These solutions include multi-weapon turret, situational awareness and driving support, active protection, and other systems which consume substantial amount of energy. Added to this, today’s vehicles need to support the energy needs of nearby infantry troops who carry a wide variety of electronic systems, all of which require charging.

Moreover, modern armoured fighting vehicles face complex fuel logistics and are required to reduce fuel consumption to extend operational range.

To sum up, the major challenges are:

  • Lower weight allocated for propulsion
  • More expensive fuel logistics
  • Higher power and energy requirements

This implies that these vehicles must have more efficient and powerful energy sources for both the vehicle itself, its soldiers and nearby units.

Smaller and lighter vehicles

The outcome of all of the above is that today’s armoured vehicles need to be much smaller and lighter. The new vehicles will have smaller internal combustion engines, which in turn require more frequent fuelling. Moreover, despite their smaller size the engines will be required to supply energy to a growing number of systems and dismounted units.

The new vehicles need also to be equipped with active defence systems which consume energy, rather than passive means.

To this day most armoured vehicles rely on the old NATO standard 6T lead-acid 1 kWh batteries. The old 6T lead-acid battery is beginning to be replaced in many armies by li-ion batteries which have up to X4 times higher energy density and perform much better in extreme conditions.

Today’s Infantry Combat Vehicles and MBTs require substantially more energy than lead-acid batteries can provide. Adding additional lead/acid batteries is not a feasible alternative as the volume allocated to batteries is restricted.

To operate in silent watch scenarios, such a vehicle must not turn on its engine for several hours to recharge its batteries. A lithium ion onboard battery, with a much higher energy density than the incumbent lead-acid, will substantially extend the duration of a silent watch operation.

New lithium rechargeable technology, standardised for armoured and military vehicles, is now mature enough to transition from the early adopter phase to the growth phase. Demand for such technology is growing following the launch of several major armoured vehicle acquisition programs requiring premium energy.

A superior energy density by a factor of 2 to 4, coupled with maintenance-free lithium battery with a 10-year lifetime, will significantly reduce the expensive field logistics of current vehicle batteries.

For comparison, a flooded/AGM 12V 6T battery provides a capacity of 80 Ah (at 1-hour discharge rate) and 0.94 kWh, while new Li-ion 6T batteries offer 165 Ah and 4.18 kWh in similar conditions.

Coupled with the latest improvements in safety and reliability of lithium batteries, which no longer deter defence contractors and military users, innovative battery technology presents a safe and reliable alternative to old lead-acid batteries.

APU replacements

To solve the problem of extended silent watch, armies have turned to diesel APUs. However, these auxiliary power units will soon be replaced by Li-Ion-based central energy banks which can provide the required energy for all on-board electronic systems. The new energy banks will replace the noisy generators which provide limited power and will enable missions to be executed in full silence for a full night.

In the long run, it is widely believed that armies will require even more power and energy for high-power weapon systems (e.g., laser guns) or hybrid drive powertrains: diesel and electric.

Several armed forces are already evaluating such hybrid vehicles. These vehicles will need much more powerful energy systems and the industry is already developing high voltage energy banks which will meet future requirements.

Ori Kost is Large Format Battery Program Manager at Epsilor

Ori Kost

Comment on this article

This material is protected by MA Business copyright See Terms and Conditions. One-off usage is permitted but bulk copying is not. For multiple copies contact the sales team.

What you think about this article:

Add your comments


Your comments/feedback may be edited prior to publishing. Not all entries will be published.
Please view our Terms and Conditions before leaving a comment.

Related Articles

Farnell signs Torex

Farnell has signed a new global franchise agreement with Torex Semiconductor ...

Get to market faster

A quick look at using Vicor's PFM and AIM in VIA packaging for your AC to Point ...

World IoT Day

ByteSnap Design, a specialist in embedded systems design and development, has ...

New possibilities

With the recent investment in the business by DBAG congatec is poised for ...