comment on this article

imec research programme targets 6G device technology

imec, the research and innovation hub in nanoelectronics and digital technologies, has announced that it has launched a research programme with the aim of laying the groundwork for next-gen mobile communications.

Dubbed ‘Advanced RF’, imec’s pre-competitive research initiative focuses on creating a roadmap beyond 5G device technology. One of the paths it will explore includes the use of a hybrid III-V/CMOS approach to energy-efficiently and cost-effectively accommodate the very high bandwidths enabled by radio frequencies above 100GHz.

With bandwidth demands doubling every two years and existing radio spectrum bands getting clogged up, the telecoms industry is looking continuously for new technologies and approaches to anticipate future mobile communication requirements. Three generations of cellular networks have been introduced since the early 2000s – starting off with the roll-out of 3G, the commercial introduction of 4G in 2009 and today’s deployment of 5G networks.

"There is still some discussion on 6G’s exact characteristics and performance specs, as the actual standardisation effort has yet to start,” said Michael Peeters, VP of imec’s R&D activities in the connectivity domain. “What is clear, though, is that next-generation wireless networks will largely outsmart their predecessors. Projected features include a 100 Gbit/s single-link throughput, µs latency and a significantly higher energy efficiency – less than 1 nanojoule per bit.”

“We believe this will be crucial to enable concepts such as federated learning between artificial intelligence (AI)-enabled autonomous systems such as self-driving cars. Other use-cases include the deployment of very high-speed, ultra-reliable mobile hot spots in dense urban centres, the support of immersive augmented reality (AR) applications and holography,” he added.

The search for more bandwidth is inextricably linked with the use of higher radio frequencies: the higher the frequency, the more bandwidth that is available. As a consequence, while the 5G mobile networks that are on the verge of being deployed will initially operate in the 28 and 39 GHz bands, future mobile networks will resort to frequencies above 100GHz to cater to the world’s growing bandwidth demands. A similar shift to higher frequencies is happening outside of the cellular space as well.

“And that is where we come across one of the main challenges to making affordable solutions a reality – as today’s standard silicon device technology lacks the required transmit power and energy efficiency at higher radio frequencies,” said Nadine Collaert, program director for imec’s analog/RF activities.

“New III-V materials – such as indium phosphide (InP) – might offer a way out, but do not yet lend themselves to be integrated onto a silicon platform. Hence, we will specifically look into hybrid III-V/CMOS approaches. We will investigate how III-V materials can heterogeneously be combined with CMOS technology, how those materials perform in terms of reliability, which degradation mechanisms are at work, etc. Building on those insights, we aim to create mobile device technology that efficiently and cost-effectively operates at 100GHz and beyond,” she said.

The networks that will use these mobile links will likely also need new approaches to the protocol stack from the physical to network layer. The default choice nowadays for high bitrate air interfaces, orthogonal frequency domain multiplexing (OFDM) may no longer be the right choice. More directional beams at higher frequencies can make much more aggressive use of spatial multiplexing. Meshing and even stronger separation of data and control may become needed. Here, we will leverage the expertise we have built e.g. on mmWave channel modelling, dense and short distance meshing, and time sensitive networking.

“It is widely recognized that future mobile networks will have to operate at frequencies above 100GHz to deliver data rates of 100 Gbit/s and more. So far, however, a clear and mature pathway to developing the underlying technology has been lacking,” adds Luc Van den hove, CEO at imec. “With our Advanced RF program, we aim to extend our impact beyond our pioneering role in the semiconductor space – providing insight and technology across the connectivity ecosystem and not only when it comes to enabling 6G, but also to accommodate the next generation of Wi-Fi communications.”

Over the past few years, imec researchers have already conducted quite some research into this topic. One example includes their work in the ECSEL JU ‘Taranto’ project, resulting in the development of an integrated, compact 140GHz radio module that enables single-link data rates up to 80 Gbit/s in an energy-efficient way.

Author
Neil Tyler

Comment on this article


Websites

http://www.imec.be

Companies

IMEC

This material is protected by MA Business copyright See Terms and Conditions. One-off usage is permitted but bulk copying is not. For multiple copies contact the sales team.

What you think about this article:


Add your comments

Name
 
Email
 
Comments
 

Your comments/feedback may be edited prior to publishing. Not all entries will be published.
Please view our Terms and Conditions before leaving a comment.

Related Articles

Quad-output SIMO PMIC

The MAX77655 single-inductor multiple output (SIMO) power management IC (PMIC) ...

Boosted NFC

This video provides a brief introduction on how ams' boostedNFC technology ...

Digital consciousness

​Would you consider uploading your brain to the cloud if it meant you could ...

Under attack

According to Gartner, two thirds of organisations are planning to deploy 5G by ...

Data privacy concerns

Professor Antonio Capone of the Politecnico di Milano University talks to Neil ...