31 May 2012

15W dc/dc converters offer 91% efficiency

Two new families have been added to XP Power's range of compact metal cased dc/dc converters.

The JCG15 and JTF15 series are said to offer a power density of up to 37.5W per cubic inch with an efficiency of up to 91%. Available in a 24pin DIP measuring 31.75 x 20.32 x 10.16mm, the company says their design results in less wasted heat and assists in thermal management of the end system.

Providing nominal inputs of 12, 24 or 48VDC, the JCG15 series accommodates 2:1 input ranges of 9 to 18, 18 to 36 and 36 to 75VDC. The JTF15 accepts 4:1 inputs of 9 to 36 and 18 to 75VDC. Both single and dual output models are available. Single outputs are 3.3, 5.1, 12 or 15VDC and duals are +/- 5, +/- 12 or +/- 15VDC.

The converters have an input to output and input/output to case isolation of 1600VDC. A remote on/off signal control is standard across the range and can be used to control the output rails or to sequence start up procedures. All the units feature overvoltage and continuous short circuit protection.

The JCG series operates from - 40 to 100°C and the JTF series to 105 °C.

Author
Simon Fogg

Supporting Information

Websites
http://www.xppower.com/

Companies
XP Power

This material is protected by Findlay Media copyright
See Terms and Conditions.
One-off usage is permitted but bulk copying is not.
For multiple copies contact the sales team.

Do you have any comments about this article?


Add your comments

Name
 
Email
 
Comments
 

Your comments/feedback may be edited prior to publishing. Not all entries will be published.
Please view our Terms and Conditions before leaving a comment.

Related Articles

€55m power electronics project

Described as one of the most important European energy efficiency research ...

Converters cut space by 50%

The MTU2 series of surface mounted 2W DC/DC converters is claimed to be 50% ...

Intersil targets power lead

Intersil has announced plans to use its technology portfolio and track record ...

A/D converters get it right

Successive approximation A/D converters, with resolutions of up to 18bit and ...

DC transmission on a comeback

The pressure throughout the energy supply chain to deliver electrical power ...

Power design survey results

A power design survey conducted by New Electronics threw up some interesting ...

Power electronics in EVs

This whitepaper presents a review of power electronics systems in electric ...

Power management ics

This whjitepaper presents various application scenarios where high voltage ...

Power saving techniques

Wireless telecommunications has given rise to a host of new portable ...

6W DC/DC converters

XP Power has announced the ITX series of 6W DC/DC converters. Available in an ...

Low voltage power supplies

TDK has added 12 and 15V models to its ZWS300BAF series of single output power ...

1W DC/DC converters

Murata has announced the NCS1 family of single output, 1W DC/DC converters.

PCIM Europe 2014 Conference

20th – 22nd May 2014, Nuremburg, Germany

Power management forum

28th October 2014, Williams F1 Centre, Oxford

NexFET MOSFETs from TI

In this video product marketing engineer, Rich Nowakowski, discusses a family ...

TI power design tools

Discover and get to market faster with TI Power Design Tools; easy-to-use ...

3E EPM Hands on Digital Power

Introduced by Ericsson in 2008, 3E* digital power products and solutions became ...

Packing a powerful punch

Power is back when it comes to industrial system performance and efficiency. ...

Powering ahead

Too often in the past, electronics industry initiatives have been announced ...

Regulated power?

Power supply specialists will no doubt be raising an eyebrow at a report which ...

Patrick Le Fèvre, Ericsson

Patrick Le Fèvre, marketing director, Ericsson Power Modules, talks with Chris ...

Andy Gales, vp, Vicor

Andy Gales, vice president, international sales, Vicor, talks with Chris Shaw