comment on this article

SEGGER introduces RAID5 to embedded systems

SEGGER adds a RAID5 option to its emFile embedded file system to maximise data integrity and reliability.

RAID5 delivers what SEGGER describes as "unsurpassed data integrity" with an additional layer of fail-safety on top of the CRC and/or error correction used by the underlying driver or storage medium.

With RAID5, the storage device is divided into several partitions, one of which holds parity information allowing data recovery in case of a partition fail. It can be used on any storage medium and the parity information can be stored on the same storage device (in a separate partition) or on a separate device.

The add-on has a tiny memory footprint, typically using about 1kB of RAM and 3kB of flash memory.

RAID5 is available as an additional option and as an alternative to RAID1 which uses 50% of the raw storage capacity for data security. Whereas, the amount of storage used by RAID5 is configurable, typically using 5% or less.

Being part of the emFile storage layer, the new add-on can also be used for USB Mass storage as well as other applications.

Author
Bethan Grylls

Comment on this article


This material is protected by MA Business copyright See Terms and Conditions. One-off usage is permitted but bulk copying is not. For multiple copies contact the sales team.

What you think about this article:


Add your comments

Name
 
Email
 
Comments
 

Your comments/feedback may be edited prior to publishing. Not all entries will be published.
Please view our Terms and Conditions before leaving a comment.

Related Articles