comment on this article

RS Components introduces new version of entry-level Arduino Uno WiFi board for IoT projects

RS Components has announced the availability of the latest Arduino board that comes with WiFi wireless networking capability and more processing power than previously available. This has been achieved by integrating a new 8-bit microprocessor from Microchip.

This second version – Rev2 – of the Arduino Uno WiFi board is functionally the same as the Arduino Uno Rev3, but also comes with built-in WiFi, enabling easy connection to the Internet, plus the addition of an onboard IMU (Inertial Measurement Unit) sensor. The board, which comes in the Uno’s 68.6 x 53.4mm form factor, is based around the new ATmega4809 8-bit processor from Microchip, which in turn integrates 6KB of SRAM and 256 bytes of EEPROM.

The board’s onboard wireless communications SoC module comes with an integrated TCP/IP protocol stack for access to WiFi networks and can act as an Internet access point. The module also delivers security for users, as the WiFi connection is secured via the inclusion of a new ECC608 crypto-chip accelerator.

The Uno board has 14 digital input/output pins – with six that can be used as PWM outputs – and six analogue inputs. Other features include a 16MHz ceramic resonator, USB connection, an ICSP header, power jack and reset button. A useful feature of the Uno is support for OTA (Over-The-Air) programming, enabling the transfer of Arduino sketches or WiFi firmware.

Offering plug and plug capability, users can be quickly up and running following connection to a computer via a USB cable. The board can also be powered via an AC-DC adapter or battery.

The Arduino Uno WiFi Rev2 board is shipping now from RS in the EMEA and Asia Pacific regions.

Author
Bethan Grylls

Comment on this article


This material is protected by MA Business copyright See Terms and Conditions. One-off usage is permitted but bulk copying is not. For multiple copies contact the sales team.

What you think about this article:


Add your comments

Name
 
Email
 
Comments
 

Your comments/feedback may be edited prior to publishing. Not all entries will be published.
Please view our Terms and Conditions before leaving a comment.

Related Articles

Fault detector

A tool that is able to spot defects or unwanted features much earlier in the ...

Definition in demand

Consumer interest in 4K continues to increase and by the end of 2018 4K TV ...

Managing your IPR

It’s essential that companies consider managing their intellectual property ...

Dual-Radio dev kit

By supporting concurrent communication over Bluetooth Low Energy (BLE) and ...

Smart Home Expo

The Smart Home Expo, which focuses on the future of smart technologies, ...

Get to market faster

A quick look at using Vicor's PFM and AIM in VIA packaging for your AC to Point ...

Semiconductor boom

Compared to an ailing steel industry, just a few years ago, the semiconductor ...

Sourcing components

Since the launch of the Model 3, Elon Musk has been under significant pressure ...

Planning pays off

Described as a one-stop shop Plexus provides companies with engineering, ...

Piezoelectric haptics

Boréas Technologies’ CEO, Simon Chaput, talks to Neil Tyler about the company’s ...

Teach them to fish

Last year was dubbed the “worst ever” by the Online Trust Alliance for data ...