Power electronics is a key element in the world of electronic design and engineering and electronic engineers need to have a thorough understanding of this area if they’re going to create successful products.

In this section, New Electronics keeps designers up to date with the latest developments in the power electronics market – everything from DC/DC converters to IGBTs to battery technology. In fact, New Electronics covers any power product that can go on a PCB.

New range of embedded power supplies

Campbell Collins, a supplier of power supplies, capacitors and power semiconductors, has added to its franchise list by taking on Integrated Power Designs' (IPD) range of AC/DC and DC/DC embedded power supplies.

Brick power module optimises 5V bus voltage to match load requirement

Ericsson's BMR454 0002/004 is described as having a typical efficiency of 94% at 50% load and 93.5% at 100% load. Due to digitally controlled dead-time optimisation combined with a power-train, the BMR454 0002/004's flat efficiency curve is designed to reduce power losses to a minimum, making it possible to pack as much power into an eight-brick format, as would normally only be possible in a quarter-brick module.

Integrated power modules for POL supplies

Intersil's ISL8204M and ISL8206M are switch mode power supplies in a single compact surface mount package. Integrated are a PWM controller, power mosfets, power inductor and associated discrete components.

Compact filter for dc/dc converters

Calex Electronics has launched a filter module for dc/dc converters. The EFIL-100-10 filter module is 1 x 2 x 0.45in input differential and common mode filter for Calex dc/dc converters.

Switching power inductors for SMPS

Designed for use in the input or output sections of switch mode power supplies, Total Frequency Control is offering vertical mount semi encapsulated power inductors for applications such as mobile phone chargers, computer power supplies and lighting applications.

Meanwell CEN-100 series IP rated power supply

Meanwell's 96W metal case power supply, the CEN-100 series, has been designed primarily for the led markets, but is suitable for any installation that requires a power supply capable of withstanding harsh environments.

Line conditioning modules

Gaia Converter, a specialist of power converter modules, has launched a range of line conditioning modules for dips, brown out, transients and spike protection for military, avionics and similar high reliability applications.

Power mosfet offers low on resistance

Vishay Intertechnology claims its 12-V p-channel TrenchFET Gen III power mosfet has the industry's lowest on resistance for a p-channel device in the thermally enhanced PowerPAK SC-75, which features a 1.6 x 1.6mm footprint area.

'Green' PoE/PoE+ quad PSE controller

Mixed signal IC specialist, Silicon Laboratories has introduced the Si345x family, which it claims is the industry's most integrated, energy efficient quad PoE power sourcing equipment (PSE) controllers.

Subscribe to our Newsletter

Filter by Category


Editors Choice

Ethernet chip is ‘TSN ready'

A real-time Ethernet Multi-protocol (REM) switch chip from Analog Devices is said to ...

MCUs have digital filter

STMicroelectronics has begun volume production of its STM32L45x MCU range. According ...

Stepper-motor controller

Toshiba Electronics Europe has started sampling a 40V/3.0A stepper-motor control IC ...