comment on this article

M12 power K coding offers integrated transmission of data, signals and power

HARTING has introduced a new version of its M12 circular connector in the IEC 61076-2-111 standard K-coding.

The new configuration enhances the M12, already known as an interface for data and signals transmission, by offering a similar compact interface for energy-intensive applications. With four power contacts and a protective earth contact, it is possible to safely transmit 7 kW at 630 V and 16 A.

The ongoing trend towards miniaturisation is having an increasing impact on the space-saving supply of voltage to compact drives as well as on networks. The step towards developing and standardising the K-coding is therefore a logical and necessary one for HARTING. Previously, higher-powered supplies for circular connectors have normally been handled via PROFINET, of which the M12 L-coding device with 0.75 kW at 63 V and 16 A is a well established standard.

In order to offer the widely-used M12 form factor to device manufacturers for voltage supply, HARTING will be supplying the K-coding product with 7 kW at 630 V and 16 A from Spring 2019, allowing the integrated transmission of data, signals and power. The logical consequence for housing manufacturers will be simplified planning and cost savings.

With power of this magnitude in a compact M12 housing, particular attention has to be paid to clearance and creepage distances to protect users properly. This is accomplished with a PE contact attached to the housing which is configured as a pre-leading pin in the mating face in order to bleed off voltage and conduct away flashovers on the housing or between contacts.

With the high voltages, the PCB socket must be protected from flashover on the contact side. To this end, all the hold-downs are separated from one another with an insulator. K-coded cable is available in a crimp version. The connection will be secured with the familiar screw fitting typical of the M12 design. There will also be a new PushPull variant which clicks audibly into place.

Author
Bethan Grylls

Comment on this article


This material is protected by MA Business copyright See Terms and Conditions. One-off usage is permitted but bulk copying is not. For multiple copies contact the sales team.

What you think about this article:


Add your comments

Name
 
Email
 
Comments
 

Your comments/feedback may be edited prior to publishing. Not all entries will be published.
Please view our Terms and Conditions before leaving a comment.

Related Articles

Fault detector

A tool that is able to spot defects or unwanted features much earlier in the ...

Definition in demand

Consumer interest in 4K continues to increase and by the end of 2018 4K TV ...

Managing your IPR

It’s essential that companies consider managing their intellectual property ...

Dual-Radio dev kit

By supporting concurrent communication over Bluetooth Low Energy (BLE) and ...

Smart Home Expo

The Smart Home Expo, which focuses on the future of smart technologies, ...

Get to market faster

A quick look at using Vicor's PFM and AIM in VIA packaging for your AC to Point ...

Semiconductor boom

Compared to an ailing steel industry, just a few years ago, the semiconductor ...

Sourcing components

Since the launch of the Model 3, Elon Musk has been under significant pressure ...

Planning pays off

Described as a one-stop shop Plexus provides companies with engineering, ...

Piezoelectric haptics

Boréas Technologies’ CEO, Simon Chaput, talks to Neil Tyler about the company’s ...

Teach them to fish

Last year was dubbed the “worst ever” by the Online Trust Alliance for data ...