06 August 2012 Industrial displays with RGB background illumination module Electronic Assembly's range of industrial displays includes an RGB background illumination module which makes it possible to set any shade of colour, including white. The five graphic displays of the DOG line offer a resolution of 102 x 64 to 160 x 104 pixels. The three text displays can show two or three lines of text at 16 characters per line, or a single line with up to 8 characters. The display is functionally separated from the background illumination module used. Therefore, display and illumination modules can be combined to accommodate various design requirements. Communication takes place via an SPI interface with up to 20MHz of processing speed. Windows compatible simulation software can be downloaded free of charge and a test board is available for connecting to the usb port of a pc. Designed to be installed in all types of machine, device and system, the displays are not thicker than 6.5mm with the illumination unit, or 2mm without. The display units are suitable for battery powered and mobile devices, and can be soldered directly to the circuit board without any additional assembly. The DOG displays come with a single voltage source of 3.3V, while the text displays run with a 3.3 or 5V source. Capable of operating from -20 to 70 °C, the display modules can be used in various industrial application environments. Author Simon Fogg Comment on this article Websites http://www.lcd-module.com/ Companies Electronic Assembly Solutions This material is protected by MA Business copyright See Terms and Conditions. One-off usage is permitted but bulk copying is not. For multiple copies contact the sales team. What you think about this article: Add your comments Name Email Comments Your comments/feedback may be edited prior to publishing. Not all entries will be published. Please view our Terms and Conditions before leaving a comment.