comment on this article

Eighth brick converters target high density embedded applications

Eighth brick converters target high density embedded applications
Eighth brick converters target high density embedded applications

Murata Power Solutions has announced the UWE series of 100 to 120W open frame isolated DOSA compatible eighth brick dc/dc converters designed for embedded computing applications and instrumentation subsystems.

Using an industry standard through hole package measuring 58.42 x 22.86 x 9.91mm (2.3 x 0.9 x 0.39in), the single output units offer the nominal outputs of 3.3, 5 or 12VDC. The series is said to have an efficiency of 91.5%, meaning forced airflow is not required for most applications.

The converters operate from –40 to 8°C and accommodate a wide 4:1 input voltage range from 18 to 75VDC around a nominal 48VDC. Line regulation is kept within +/- 0.25%Vout and load regulation is maximum +/- 0.2%Vout across the complete range.

Author
Simon Fogg

Comment on this article


This material is protected by Findlay Media copyright See Terms and Conditions. One-off usage is permitted but bulk copying is not. For multiple copies contact the sales team.

Enjoy this story? People who read this article also read...

What you think about this article:


Add your comments

Name
 
Email
 
Comments
 

Your comments/feedback may be edited prior to publishing. Not all entries will be published.
Please view our Terms and Conditions before leaving a comment.

Related Articles

Embedding rail safety

Artesyn has used COTS components to create ControlSafe, a fail safe computing ...

Remote management

Out of Band (OOB) remote management can help to optimise the total cost of ...

FT51 and FT90 MCUs

FTDI's focus at Embedded World was on two new families of microcontrollers, ...

Unboxing the FR5969

Check out what's in your FR5969 Launchpad + Booster Pack bundle kit. The board ...

Claire Jeffreys, NEW

Claire Jeffreys, events director, National Electronics Week, talks with Chris ...