Products Filtered by - Industrial

Within the world of electronics developments in Industrial can be crucial to design engineers. At New Electronics we are aware of the importance of staying abreast of the recent advances in and the impact it can have on your role, that’s why we have collated all the latest news in one place.

Converter offers longer battery run times

ams has introduced a 1A synchronous buck converter with a wide input voltage range, high efficiency and low stand-by current. The device is said to suit designs powered by a single cell lithium-ion battery.

Flexible fanout buffer

IDT has expanded its portfolio of programmable timing devices with the introduction of the 5P11xx family of low-jitter universal output fanout buffers.

Cypress samples 4Mb asynchronous SRAMs with ECC

Cypress Semiconductor has begun sampling 4Mb asynchronous SRAMs with Error-Correcting Code (ECC), which enables them to provide higher levels of data reliability, without the need for additional error correction chips. As a result designs can be simplified and board space reduced.

High accuracy magnetostrictive sensing device

MTS Sensors has introduced a new high performance magnetostrictive position sensor, that uses the company’s Temposonics technology. The ET sensor has been designed for use in applications required to operate in high temperature environments. It can deliver up to 0.005mm resolution when used in combination with a suitable controller.

Cypress offers fully-certified, small-form-factor Bluetooth Smart module

Cypress Semiconductor has introduced a Bluetooth Smart module that has been designed to provide an end-to-end Bluetooth Low Energy solution. The new, small-form-factor EZ-BLE PRoC module, based on Cypress’s PRoC BLE Programmable Radio-on-Chip solution, includes Bluetooth 4.1 qualification and worldwide regulatory certification, simplifying design and cutting time to market.

Complete Wireless M-Bus solution

Silicon Labs has introduced a complete Wireless M-Bus platform solution designed to simplify the development of wirelessly connected smart meters for electricity, gas, water and heat resources in the European market.

TFT provides consistent images from all viewing angles

Industrial LCD manufacturer, KOE, the industrial LCD manufacturer, has introduced a new high performance 3.5" TFT display. The Rugged+ TX09D200VM0BAA features a 3:4 aspect ratio, QVGA (240 x 320 pixels) resolution and IPS (in-plane switching) technology to provide consistent colour and image performance from all viewing angles.

Ultra-low-jitter family of LVCMOS clock buffers

Integrated Device Technology has unveiled a new family of clock buffers. The 5PB11xx family of LVCMOS fan-out buffers is able to provide low-jitter metrics of sub-50 fsec RMS additive phase jitter (12KHz to 20MHz), as a result it is able to offer system designers greater jitter margin to help meet system clock requirements. The small die size enables the chip to fit within a DFN 8-pin package as small as 2 by 2 millimeters.

Fully encapsulated 50A digital power module from Intersil

Intersil has unveiled the ISL8272M, its first 50A fully encapsulated digital DC/DC PMBus power module. The device is a complete step down power supply that delivers up to 50A from industry standard 12V or 5V input power rails. Four modules can be combined to provide up to 200A.

Two phase 90A POL DC/DC module

Ericsson has launched a two phase 90A digital point of load (POL) DC/DC power module that offers compensation free performance and the ability to connect modules in parallel to provide up to 360A.

DC/DC converters feature non linear adaptive control

The iEH series of 300W 1/8th brick DC/DC converters from TDK-Lambda are said to use digital non linear adaptive control to improve dynamic response, system stability and reliability. This, says the company, makes the devices suitable for demanding applications, including communications and test and broadcast.

Synchronous buck switching regulator delivers 2A

The ISL8002B synchronous buck switching regulator from Intersil delivers up to 2A from a 2.7V to 5.5V input supply. Switching at 2MHz is said to provide better transient response, whilst features such as programmable soft start and output tracking and sequencing of programmable devices increase system reliability for point of load conversion.

Microchip LoRa technology looks to enable IoT

Microchip has launched the first in a series of modules for the LoRa technology low-data-rate wireless networking standard, which enables Internet of Things (IoT) and Machine-to-Machine (M2M) wireless communication with a range of more than 10 miles (suburban), a battery life in excess of 10 years, and the ability to connect millions of wireless sensor nodes to LoRa technology gateways.

EnOcean adds data encryption to wireless sensors portfolio

Energy harvesting wireless technology specialist, EnOcean, has added encrypted data communication to its complete range of energy harvesting wireless sensor modules. These security mechanisms can optionally be activated and prevent different types of attacks, including replay and eaves-dropping attacks or forging messages.

THH 230ºC hermetic series lifespan extended

AVX Corporation has extended the lifespan of its THH 230ºC hermetic series high temperature SMD tantalum capacitors to 10,000 hours at 200ºC and 50% derating. Available in two large case sizes (9/CTC-21D and I) that provide high capacitance values spanning 22µF to 100µF, the series features the highest temperature ratings of any SMD tantalum capacitor available on the market: -55ºC to +230ºC for 9/CTC-21D case components and -55ºC to +215ºC for I case components.

New family of Hall effect sensors target contactless switching

Diodes Incorporated has introduced a new family of micro-power 8 bit resolution Hall effect sensors for contactless switching in portable consumer electronic products, domestic appliances and industrial equipment. The sensors, operating over a supply range of 1.6V to 3.6V and a magnetic range of ±400G, have been designed to allow the operating mode and sampling rate to minimize current consumption down to micro-power levels.

D/A converter range extended

Microchip has expanded its non volatile D/A converter product line with the addition of the MCP47FEBXX range. The low power, single- and dual channel devices feature 8, 10 and 12bit resolution, integrated EEPROM and an I2C interface.

Subscribe to our Newsletter

Editors Choice

Voltage mode boost controller

Diodes has introduced a constant frequency, voltage mode, external compensation ...

ERIC – the half an ic

LPRS has launched its low cost easyRadio Integrated Controller (eRIC), which is half ...

Low noise a/d converters

Intersil has introduced two new ultra low noise 24bit a/d converters.