10 September 2012

METCASE Launches Ventilated 19” Rack Cases

METCASE has launched ventilated versions of its all new COMBIMET 19" rack case series. These new rack cases are designed to assist in-rack thermal management by allowing unrestricted airflow through the enclosures. To achieve this, a matrix of specially designed ventilation slots is provided in the top and base panels.



These attractive and highly versatile 19" rack enclosures are designed to conform to DIN 41494 and IEC 297-1 standards for 19" equipment. Typical applications for the new models will include rack mounted test and measurement systems, networking and communications equipment.

COMBIMET 19" cases are manufactured in robust yet lightweight aluminium and feature two ergonomic front panel handles which are designed for comfortable carrying prior to installation in the rack.

The range is offered in 1U, 2U and 3U heights in two depths of 265 mm and 365 mm. Special sizes can be manufactured on demand. The enclosures are powder painted in light grey, RAL 7035 or black, RAL 9005.

Each COMBIMET consists of an anodised 19" front panel with two front panel handles, two side panels, the top and base and a recessed removable rear panel. The top and base panels are fully perforated with ventilation slots and include a series of holes for fitting PCB mounting pillars, or the internal mounting plate kit (accessory).

All the fabricated parts are fitted with M4 earth studs for electrical continuity. Every model is supplied fully assembled. Prices start at £64.

METCASE offers a full customising service on the COMBIMET 19" rack cases with made-to-measure sizes, CNC punching, milling and drilling, silk-screen printing and much more, thus providing fully finished enclosures ready for fitting the electronic components.

More information on these enclosures can be found on the METCASE website

Author
OKW Enclosures

Supporting Information

Websites
http://www.metcase.co.uk/enclosures/combimet19.htm

Companies
OKW Enclosures Ltd

This material is protected by Findlay Media copyright
See Terms and Conditions.
One-off usage is permitted but bulk copying is not.
For multiple copies contact the sales team.

Do you have any comments about this article?


Add your comments

Name
 
Email
 
Comments
 

Your comments/feedback may be edited prior to publishing. Not all entries will be published.
Please view our Terms and Conditions before leaving a comment.

Related Articles

Cyntech Raspberry Pi box

Cyntech Components has designed a compact, low cost enclosure for the Raspberry ...

Designers think out of the box

The first thing to clarify is that 3d printing is really the buzzword that has ...

Shaping your future

Henry Ford once said the Model T was available in any colour you wanted, so ...

Finishes for enclosures

Plastic enclosures have many benefits: many suppliers serve the market with a ...

Plastic enclosures revolution

Sponsored by OKW: Plastic enclosures are undergoing a dramatic revolution that ...

The development of enclosures

Sponsored by OKW: Over the last four decades, one pioneering company more than ...

New technoPLUS UV Stable IP66

Sponsored by OKW: ROLEC has launched new technoPLUS IP66-rated enclosures – ...

Handheld enclosures

Sponsored by OKW: The SOFT-CASE series of handheld enclosures from OKW is now ...

Plastic enclosures from OKW

Sponsored by OKW: Today's electronics are being used in many different ...

BLOB handheld enclosures

BLOB is a unique range of handheld enclosures for medical devices and portable ...

Portable handheld enclosures

Advanced handheld enclosures for portable electronics equipment. Unique ...

Customised plastic enclosures

OKW offers an extensive customising service for its advanced range of plastic ...