13 February 2012

Waterproof connector for industrial sensing applications

Intelliconnect (Europe) now offers a range of multi pin waterproof connectors available with from 4 to 14 connecting pins.

According to the UK based manufacturer of rf and waterproof connectors, the 4 way connector compliments, in performance and dimensions, the commonly used TNC waterproof coaxial rf connector.

Remote sensing and monitoring of equipment and pipelines in industrial, water and petrochemical installations is becoming increasingly popular. Remote monitoring eliminates the need for constant manual measurement and enables planned intervention and correction to take place, reducing costly failures and emergency shut-downs of plant. Remote sensing systems typically use a range of permanently installed wireless enabled sensors which can measure the thickness of pipes for signs of corrosion, flow direction, flow rates and other critical parameters as part of a control and monitoring system.

The company has developed a range of multi pin connectors capable of handling 3 amps of signal current and rated to IP68 in its unmated condition. In order for the connector to be fitted alongside waterproof TNC connectors used for rf antennas and provide a uniform panel design, the 4 contact pins required were installed into the same style connector shell. The insert design is keyed to ensure positive mating and eliminate the possibility of damage by mis-mating.

The connector is designed to handle power as well as low voltage signals enabling switching and actuation of electro mechanical devices. The maximum space between the contacts in a TNC body allows for an operating voltage of 300v RMS with a dielectric withstanding voltage (DWV) of 1000v RMS. The Insulation resistance of the connector is 5000M? to ensure reliable operation in high altitude or high humidity applications and the durability rating is specified at 500 insertion cycles minimum.

To allow for all possible environmental conditions in use, from sub zero conditions in places such as Russia and Alaska through to the heat of Texas or Saudi Arabia an operating range of -65 to 165°C is standard. All metal components are standard nickel plating over a brass body to meet TNC specification Mil-prf 39012 enabling both the Intelliconnect 4 way quadraxial connector and rf TNC connector to be fitted into equipment and offer a uniform design both aesthetically and functionally.

Intelliconnect has extended this new waterproof multi pin connector range from 2 up to 14 way connectors. All models are rated to IP68, waterproof in their unmated condition to a depth of 20m for a period of four hours minimum. Typical applications include MIL, marine, oil and gas, communications and rail traction.

Author
Chris Shaw

Supporting Information

Websites
http://www.intelliconnect.co.uk

Companies
Findlay Media Ltd

This material is protected by Findlay Media copyright
See Terms and Conditions.
One-off usage is permitted but bulk copying is not.
For multiple copies contact the sales team.

Do you have any comments about this article?


Add your comments

Name
 
Email
 
Comments
 

Your comments/feedback may be edited prior to publishing. Not all entries will be published.
Please view our Terms and Conditions before leaving a comment.

Related Articles

Toshiba Bluetooth IC

Toshiba has introduced a low power Bluetooth IC that supports Bluetooth Low ...

Bendable optical interconnect

Researchers from Ghent University have created what they believe may be the ...

Power IC for next gen EVs

A single channel power IC, designed to bring the sound of a conventional ...

Interconnect: Polymer fibres

Fibre optics are good for transmitting high speed data across the Atlantic, but ...

Making the standard start

Connectors are not the glamorous end of the market. They are expected to do ...

Connecting with compliance

When the Reduction of Hazardous Substances (RoHS) Directive came into force in ...

Connecting to Android Platform

This white paper from FTDI Chip will describe some of the options for ...

XMOS XS1 Architecture

An XS1 combines a number of XCore processors, each with its own memory, on a ...

Synchronous buck regulator IC

The A8672 from Allegro MicroSystems Europe is a synchronous buck regulator IC ...

Current sensing IC

International Rectifier has launched the IR25750, a general purpose current ...

Power management ICs

A new family of power management ICs, aimed at RF agile radio and FPGA based ...

RFIC simplifies design process

Nikolaus Klemmer, High Speed Products, has been developing communcations ...

Home automation system

Manage your home with TI technology and control various home applications ...

SN65LVDS324 overview

Ross demonstrates an easy and low cost way to build a video camera system that ...

Connectivity, the new essential service

One of the legacies of having an engineering background is that, inevitability, ...

Patrick Zammit, Avnet

Patrick Zammit, president, Avnet Electronics Marketing EMEA, talks with Chris ...

Claire Jeffreys, NEW

Claire Jeffreys, events director, National Electronics Week, talks with Chris ...