20 September 2012

Thermistor deliers battery pack and power supply temperature detection

Murata has launched the NXRT series of radial leaded NTC thermistors.

Utilising the company's NCP15 series chip thermistor within an epoxy resin, the new range is available with the nominal resistance values of 2, 10, 33, 47 or 100kohm at 25°C.

Nominal resistance accuracy is typically in the range of +/-1 to 5%. Measurement sensitivity is believed to be the best available within the industry. At 50°C, the temperature detection sensitivity deviation is said to be within +/-0.6°C, and is within +/- 1.4°C at 100°C.

The series is suitable for a range of consumer electronics and domestic electrical appliances, and particularly suited to measuring the temperature of a power supply circuit or battery.

The thermistor package measures 4.0 x 2.0 x 40mm in total, including the 0.4mm diameter radial leads. The NXRT series is suitable for use in most environments and has an operating temperature range from - 40 to 125°C.

Author
Laura Hopperton

Supporting Information

Websites
http://www.murata.eu

Companies
Murata Electronics (UK) Ltd

This material is protected by Findlay Media copyright
See Terms and Conditions.
One-off usage is permitted but bulk copying is not.
For multiple copies contact the sales team.

Do you have any comments about this article?


Add your comments

Name
 
Email
 
Comments
 

Your comments/feedback may be edited prior to publishing. Not all entries will be published.
Please view our Terms and Conditions before leaving a comment.

Related Articles

€55m power electronics project

Described as one of the most important European energy efficiency research ...

Processor for wearables

Toshiba's ApP Lite processor provides integrated sensing, data processing and ...

Converters cut space by 50%

The MTU2 series of surface mounted 2W DC/DC converters is claimed to be 50% ...

A/D converters get it right

Successive approximation A/D converters, with resolutions of up to 18bit and ...

Crossing the threshold

For good reason, CMOS chip designers pay careful attention to the equation that ...

DC transmission on a comeback

The pressure throughout the energy supply chain to deliver electrical power ...

Power electronics in EVs

This whitepaper presents a review of power electronics systems in electric ...

EV power electronics

This whitepaper from Altera describes the benefits of using fpga based control ...

Power management ics

This whjitepaper presents various application scenarios where high voltage ...

Half and full-bridge drivers

The industry's first small form factor half and full-bridge drivers have been ...

Dual DC/DC converters

Linear Technology has announced the LT8471, a dual DC/DC converter that ...

High voltage power module

Intersil has announced the ISL8216M – an 80V, 4A non-isolated DC/DC step down ...

PCIM Europe 2014 Conference

20th – 22nd May 2014, Nuremburg, Germany

Power management forum

28th October 2014, Williams F1 Centre, Oxford

Class 0.1 metering SoC

Discover TI's Class 0.1, metering System-On-Chip Evaluation Boards: ...

When to use a pre-driver

What is the difference between a pre-driver and an integrated motor driver and ...

Motor diagnostics innovations

Texas Instruments Innovator Tim Adcock explains in the latest whiteboard video ...

Packing a powerful punch

Power is back when it comes to industrial system performance and efficiency. ...

Powering ahead

Too often in the past, electronics industry initiatives have been announced ...

Changing the shape of consumer electronics

Composites have found use in many applications over the years, but they have ...

Keith Attwood, ceo, e2v

Many UK based technology companies can trace their origins to the years ...

Rick Clemmer, ceo, NXP

Rick Clemmer believes high performance mixed signal is just one of the sectors ...

Dave Bell, president, Intersil

Intersil's president updates Graham Pitcher on the company's progress in ...