20 September 2010
Storage modules for industrial applications
Swissbit will present its industrial dram memory modules and Flash products consisting of CF, SD, USB, PATA and SATA interfaces on booth A6.421.
One of the highlights is the F-100 Series CFAST Flash Storage Card. This 1in sdd combines the original CompactFlash (CF) card form factor with a Serial ATA (sATA) interface. It is equipped with a single level Cell Flash memory. This first generation reaches 105MB/s with 4 flash channels.
The new 2GB ddr2 Small Outline DIMM in chip-on-board technology has been designed especially for the use in Small Form Factor (SFF) industrial pcs. This 200 pin SODIMM combines 1GB ddr2 dies with Winbond ‚buried wordline' process with Swissbit COB (chip on board) technology. Thus, the module becomes mechanically robust against shock and vibration.
Due to the direct die attachment the heat dissipation is enhanced via the substrate and socket and by the extended surface. This keeps the dram chips at a lower die temperature under limited airflow conditions and increases the electrical performance.
The new X-200 Series SATA 2,5in SSD in Flash technology with SATA II-3GBit/s interface features an ideal memory solution for industrial portable applications. The modules also offer faster start-up and extremely short access times. Their extended temperature range and long life cycle qualify them as first choice for the use in non-volatile, high reliable applications. The X-200 series of SSD Flash storage products are offered in densities from 4GB to 64GB with data transfer rates of up to 105MB/s.
Author
Swissbit
Supporting Information
Websites
http://www.swissbit.com
This material is protected by Findlay Media copyright
See Terms
and Conditions.
One-off usage is permitted but bulk copying is not.
For multiple copies contact the
sales team.