29 April 2010

Programmable SPV power supply range

  • Programmable SPV power supply range

The Sunpower SPV power supply range has been designed for applications demanding highly controllable dc power.

With power possibilities from 150 up to 4500W, the SPV outputs can be remotely trimmed over a very wide range – from 20 to 110% (120% for SPV-1500) of their nominal value of 12, 24 or 48VDC. The input specification is similarly flexible, with a wide range of ac and dc sources accepted.

Automation of the SPVs is further enhanced by remote sense inputs and remote on/off switching control. The SPVs each feature auxiliary 12VDC 0.1A outputs; these can power the remote control circuit if required. Alarm signal outputs are also provided. The range comprises the SPV-150, SPV-300 and SPV-1500. Two or three SPV-1500 units can be paralleled in a current sharing master/slave configuration for applications demanding up to 4500W power.

The SPV power supplies are compact, and designed for efficiency to minimise power demand and heating issues. The SPV-1500 has a power density of 8.3W/inch³, an efficiency of up to 90% and, with active PFC, a typical power factor of up to 0.98 at full load. The SPV-300 and SPV-150 likewise feature active PFC, offering a similar power factor with efficiency up to 83%. The SPV-150 needs only free air convection for cooling up to 40°C and the SPV-300 can operate with its built in fan under on/off control up to 50°C ambient.

The SPV products are safe and reliable. All models feature protection against short circuit, overload, over voltage and over temperature, and all carry UL, CUL, TUV, CB and CE certification. All models comply with comprehensive EN standards for EMS immunity and EMI conductance and radiation. The SPV-150 and SPV-300 have MTBFs of at least 207K hrs, and the SPV-1500's MTBF is 109K hrs minimum.

The SPV range is suitable for applications where the dc voltage supply must be varied over time. Examples include battery charging, lcd panel burn in, IC testing equipment, led lighting and factory automation applications within mechanical and electrical industries.

Author
Chris Shaw

Supporting Information

Websites
http://www.sunpower-uk.com

Companies
Sunpower (UK) Ltd

This material is protected by Findlay Media copyright
See Terms and Conditions.
One-off usage is permitted but bulk copying is not.
For multiple copies contact the sales team.

Do you have any comments about this article?

Add your comments

Name
 
Email
 
Comments
 

Your comments/feedback may be edited prior to publishing. Not all entries will be published.
Please view our Terms and Conditions before leaving a comment.

 

Related Articles

Infineon expands partnership

Infineon Technologies and Fairchild Semiconductor have signed a deal to expand ...

ST 'revolutionary' controller

STMicroelectronics claims its new power supply controller will enable more ...

Benchmark in miniaturisation

NXP Semiconductors has announced a breakthrough in miniaturisation with the ...

The zero Watt standard

With standby power consumption representing a significant proportion of ...

Efficiency drive

Gallium nitride has long been known to have useful properties when it comes to ...

A switch in focus

There is an amazing amount of fundamental technology research undertaken in UK ...

Mastering power modules

With the strong upsurge in the need for power electronics in applications such ...

Digital Control in a MicroTCA Power System

A look at the significant performance enhancements made available by using ...

Digital control techniques enabling power ...

Digital control can be used as an enabling technology to offer performance, ...

GaN fet driver ICs

Texas Instruments has introduced a low side gate driver for use with mosfets ...

Wideband I/Q demodulator

Linear Technology has launched the LTC5585, an ultrawide bandwidth direct ...

Semikron inverter platform

Hertford based Semikron has introduced an inverter platform designed to offer ...

embedded world 2012

Taking place from 28 February to 1 March 2012.

2.5Gb/s repeater/retimer

Sanjay introduces TI's 12.5 Gbps pin-compatible repeater and retimers plus ...

28Gb/s retimer preview

Nate and Jitendra preview TI's 25 - 28 Gbps retimer technology.

C2000 architecture

The C2000 family of microcontrollers contains a unique mix of innovative and ...

Changing the shape of consumer electronics

Composites have found use in many applications over the years, but they have ...

Power to the people

A breakthrough in battery technology could have broad implications.

Regulated power?

Power supply specialists will no doubt be raising an eyebrow at a report which ...

Rick Clemmer, ceo, NXP

Rick Clemmer believes high performance mixed signal is just one of the sectors ...

Dave Bell, president, Intersil

Intersil's president updates Graham Pitcher on the company's progress in ...

Patrick Le Fèvre, Ericsson

Patrick Le Fèvre, marketing director, Ericsson Power Modules, talks with Chris ...