24 February 2009

Low power, RoHS compliant

  • Low power, RoHS compliant

Based on the 300MHz Vortex86SX CPU from DM&P, the ultra low power ICOP-6127 measures 102 x 144mm and offers features such as LAN, 3 x USB 2.0 ports, 8 x Serial Ports (1 port configurable as RS485) LPT, floppy and 32 lines of general purpose I/O.

Additional to the onboard 2MB SPI Flash, the unit also has an enhanced IDE port supporting both conventional and Flash Drives up to 4GB.
On board graphics resolution up to 1280 x 1024 is supported through the XGI Volari Z9s chipset providing CRT, TFT/ LVDS options, whilst a diverse range of plug in expansion opportunities are possible through PC/104, PCI-104 and Mini PCI (Type III) interfaces.
The RoHS compliant ICOP 6127 incorporates a programmable watchdog timer (30.5 to 512 seconds), has a standard operational temperature range of -20 to 70C or optional -40 to 85C.
Requiring a single rail 5V dc supply at 620mA, the ICOP-6127 is targeted at traditional high end microcontroller applications.

Author
Chris Shaw

Supporting Information

Websites
http://www.dsl-ltd.co.uk

Companies
Datasound Laboratories Ltd

This material is protected by Findlay Media copyright
See Terms and Conditions.
One-off usage is permitted but bulk copying is not.
For multiple copies contact the sales team.

Do you have any comments about this article?

Add your comments

Name
 
Email
 
Comments
 

Your comments/feedback may be edited prior to publishing. Not all entries will be published.
Please view our Terms and Conditions before leaving a comment.

 

Related Articles

ADI unveils new FMC boards

Analog Devices has introduced two data converter FMC boards (fpga mezzanine ...

Electronics design made easier

element14 has teamed up with Microchip and Matrix to introduce the new PIC18 ...

802.11ac WLA test solution

National Instruments has announced early access support for testing next ...

High speed transport

Merchant chips that address 100Gbit Ethernet and optical transport are finally ...

Quartz crystals clocking off?

The exceptional mechanical and piezoelectric properties of quartz crystal ...

Taking a step back

Since product design and development consultancy Triteq was established in ...

Oryx board - reference design

The ORYX Board is an ultra low power reference design Sharp Microelectronics ...

High speed board design

Istvan Nagy, electronics design engineer at Blue Chip Technology, a leading UK ...

Test and repair solution

Many large SoC designs today incorporate several third party IP cores that ...

Analogue front end

CML Microcircuits' CMX7861 'FirmCODEC' is a full featured analogue front end ...

Embedded World: ADLINK

ADLINK Technology will present amongst other products, the following highlights ...

Transceivers achieve 20Mbit/s

Linear Technology has introduced the LTC2862-2865, a family of rugged, high ...

embedded world 2012

Taking place from 28 February to 1 March 2012.

Designing for EMC

A two day intensive course 15-16 March 2012, Birmingham Science Park, Aston.

Printed Electronics Europe

3rd-4th April 2012, Berlin, Germany

SimpleLink Product Family

Introduction to SimpleLink Wireless Connectivity Solutions.

New Sitara platform

Learn about how Texas Instruments is making the development for industrial ...

Windows Embedded Compact 7

Considering using Windows Embedded Compact 7? TI offers a boards support ...

Most expensive component

With great apologies to William Shakespeare, "a resistor, a resistor, my ...

Design reuse

It's become a cliché in news or science reports. A water treatment plant ...

TI, National Semi takeover

It's been a while since there has been a takeover on the scale of that ...

Steve Edwards, cto, CWE

Graham Pitcher finds out that COTS is now being applied at the system level.

John Schwartz, Digi Int'l

Graham Pitcher finds out from a communications specialist that M2M is slowly ...

Maria Marced, President, TSMC

Innovation, technology and the right people. Graham Pitcher finds out why ...