15 June 2012

500W filter modules target dc/dc railway applications

Vicor has announced two new 500W filtered input attenuator modules (FIAMs) for railway applications. The FIAM110 and FIAM072 are designed to provide protection for on board equipment and systems against the effects of power line transients, electromagnetic interference (EMI) and excessive in rush currents.

On board power supplies in rail environments are subject to severe levels of transients and noise that can be disruptive or damaging to systems such as lighting, communications and information displays unless properly filtered. The FIAM110 and FIAM072 are therefore designed to meet the EN50121-3-2 standard for EMI filtering and EN50155/EN50121-3-2 standard for transient protection. In addition, they both conform to RIA 12 surge and transient requirements and are qualified for demanding environmental standards.

The FIAM072 has an input voltage range between 43 and 110Vdc and the FIAM110 between 66 and 154Vdc. Both are said to provide up to 500W of output power, with efficiencies up to 98%. The devices fit the industry standard 'half brick' footprint measuring 2.28 x 2.2 x 0.5in, which is optimised for space constrained designs. According to Vicor, they are compatible with the Mini, Micro and Maxi or VI/VE-200 and VI/VE-J00 dc/dc converters from its brick product portfolio.

Author
Simon Fogg

Supporting Information

Websites
http://vicorpower.com/

Companies
Vicor UK Ltd

This material is protected by Findlay Media copyright
See Terms and Conditions.
One-off usage is permitted but bulk copying is not.
For multiple copies contact the sales team.

Do you have any comments about this article?


Add your comments

Name
 
Email
 
Comments
 

Your comments/feedback may be edited prior to publishing. Not all entries will be published.
Please view our Terms and Conditions before leaving a comment.

Related Articles

€55m power electronics project

Described as one of the most important European energy efficiency research ...

Processor for wearables

Toshiba's ApP Lite processor provides integrated sensing, data processing and ...

Converters cut space by 50%

The MTU2 series of surface mounted 2W DC/DC converters is claimed to be 50% ...

Power electronics challenges

There isn't a sector of the electronics industry that operates without the use ...

Preview: PCIM Europe 2014

Tim Fryer looks forward to the upcoming PCIM exhibition and conference, taking ...

A/D converters get it right

Successive approximation A/D converters, with resolutions of up to 18bit and ...

Power electronics in EVs

This whitepaper presents a review of power electronics systems in electric ...

EV power electronics

This whitepaper from Altera describes the benefits of using fpga based control ...

Power management ics

This whjitepaper presents various application scenarios where high voltage ...

Shunt voltage reference

The ZXRE330 3.3V shunt voltage reference from Diodes has been introduced to ...

Half and full-bridge drivers

The industry's first small form factor half and full-bridge drivers have been ...

Dual DC/DC converters

Linear Technology has announced the LT8471, a dual DC/DC converter that ...

PCIM Europe 2014 Conference

20th – 22nd May 2014, Nuremburg, Germany

Power management forum

28th October 2014, Williams F1 Centre, Oxford

Class 0.1 metering SoC

Discover TI's Class 0.1, metering System-On-Chip Evaluation Boards: ...

When to use a pre-driver

What is the difference between a pre-driver and an integrated motor driver and ...

Motor diagnostics innovations

Texas Instruments Innovator Tim Adcock explains in the latest whiteboard video ...

Packing a powerful punch

Power is back when it comes to industrial system performance and efficiency. ...

Powering ahead

Too often in the past, electronics industry initiatives have been announced ...

Changing the shape of consumer electronics

Composites have found use in many applications over the years, but they have ...

Terence Watson

Ask Terence Watson about power electronics and you're left in no doubt of his ...

Keith Attwood, ceo, e2v

Many UK based technology companies can trace their origins to the years ...

Rick Clemmer, ceo, NXP

Rick Clemmer believes high performance mixed signal is just one of the sectors ...