24 February 2009

3.5in SBC with onboard RAM and optional touchscreen interface

  • 3.5in SBC with onboard RAM and optional touchscreen interface

Trident has added the ECM-LX800D 3.5in single board computer to its range of embedded solutions.

A modified version of the Avalue ECM-LX800 board, the SBC offers 256MB of onboard RAM with the option to upgrade to 512MB, eliminating the need to install system memory.
The ECM-LX800D also features an optional built in touchscreen interface to support a 4, 5, or 8 wire touchscreen. The SBC can be powered by a wide voltage range of +10V~+28V enabling usage in a broad range of industrial applications.
With a 500MHz AMD Geode LX800 processor at the heart of the board, supported by an AMD CS5536 companion chip, the ECM-LX800D is a fanless solution, and when utilising the onboard Compact Flash socket provides a complete non mechanical solution.

Author
Chris Shaw

Supporting Information

Websites
http://www.trident-uk.co.uk

This material is protected by Findlay Media copyright
See Terms and Conditions.
One-off usage is permitted but bulk copying is not.
For multiple copies contact the sales team.

Do you have any comments about this article?

Add your comments

Name
 
Email
 
Comments
 

Your comments/feedback may be edited prior to publishing. Not all entries will be published.
Please view our Terms and Conditions before leaving a comment.

 

Related Articles

AMD launches R series

AMD has extended its embedded systems product range with the announcement of ...

Silicon Labs buys Ember

Silicon Laboratories has signed a definitive agreement to acquire ZigBee ...

Feabhas gets OK from ARM

Embedded training specialist Feabhas has been appointed an ARM Approved ...

Keeping in the loop

The humble 4 to 20mA current loop has been a faithful servant of process ...

Embedded Power roundtable

While power supply design is becoming increasingly important, knowledge is ...

Back to the future

It is highly unlikely that electronic components introduced in the early 1980s ...

Oryx board - reference design

The ORYX Board is an ultra low power reference design Sharp Microelectronics ...

High speed board design

Istvan Nagy, electronics design engineer at Blue Chip Technology, a leading UK ...

Automotive functional safety

Real time control of safety critical applications has been a longtime challenge ...

120W power supply

Murata Power Solutions has announced the MVAB120 series of open frame single ...

Embedded World: Mitsubishi unv

Mitsubishi Electric has announced new 8.4in SVGA (AA084SC01), 10.4in SVGA ...

Analogue front end

CML Microcircuits' CMX7861 'FirmCODEC' is a full featured analogue front end ...

Engineering Design Show 2012

10th-11th October 2012, Jaguar Exhibition Hall, Ricoh Arena, Coventry, UK

SENSORS + SYSTEMS 2012

24-25th october 2012, Silverstone Circuit, Northamptonshire, UK

Altium design secret one

If you've ever reviewed a hard copy of a design, schematic or pcb, you've ...

MSP430 5xx Board Part 3

This section covers a mixed signal application example.

MSP430 5xx Board Part 4

This section shows how to use the hardware timers to conserve power.

Counterfeit components

The extent of counterfeit component usage in military applications is gradually ...

Synopsys buys Magma

Magma has been nipping at the heels of the leading eda companies for some time, ...

Most expensive component

With great apologies to William Shakespeare, "a resistor, a resistor, my ...

Pete Lomas, Raspberry Pi

The man who designed the hardware for the Raspberry Pi tells Chris Shaw what ...

Rick Clemmer, ceo, NXP

Rick Clemmer believes high performance mixed signal is just one of the sectors ...

Henri Richard, Freescale

Freescale's chief sales and marketing officer tells Graham Pitcher that he's ...