31 October 2007

Wearable wideband antenna

Wearable wideband antenna

NEC says its has successfully developed a wideband wearable antenna. The high performance device, which uses a conductive fabric, can be attached to clothing or folded for portability. It can also act as a supplementary antenna in areas with poor reception.


Antennas are generally designed to operate in an open space and if used in close proximity to a human body or other object, the impedance deteriorates, causing a reduction in performance. This antenna is designed to demonstrate equally good impedance characteristics whether used in an open space or close to the body.
One of the difficulties encountered in the past when using conductive fabrics was that soldering was not possible. In this case, power is supplied to a small flexible print substrate by a soldered coaxial cable so that power supply is possible through capacity coupling with the substrate.
NEC says it will first test reception of digital terrestrial broadcasts in the 470 to 770MHz band. Later, it will test the device’s potential as an external antenna for future terminals.

Author
Graham Pitcher

Supporting Information

Websites
http://www.nec.co.jp

Companies
NEC Corporation

This material is protected by Findlay Media copyright
See Terms and Conditions.
One-off usage is permitted but bulk copying is not.
For multiple copies contact the sales team.

Do you have any comments about this article?

Add your comments

Name
 
Email
 
Comments
 

Your comments/feedback may be edited prior to publishing. Not all entries will be published.
Please view our Terms and Conditions before leaving a comment.

 

Related Articles

60GHz radio supports 7Gbit/s

A prototype 60GHz radio transceiver developed by imec and Panasonic has ...

Nujira files 150th ET patent

Nujira has announced the filing of its 150th patent relating to Envelope ...

White space network is viable

White space communications pioneer Neul has deployed the first city wide fully ...

Changing channels

As the last elements of the UK's analogue television network are switched off, ...

On the right wavelength

Given the high profile of 2.4GHz wireless standards such as Bluetooth and ...

New applications for rfid

The market for rf identification (rfid) devices is exploding. Active and ...

Analogue design challenges

Sami ur Rehman, research associate, Analog Mixed Signal Group at NUST-SEECS ...

Coexistence Digital TV

Spectrum that was previously reserved for TV broadcasting is being freed up in ...

Measuring absolute group delay of multistage ...

This white paper from Agilent Technologies describes new calibration and ...

RF5540 4.9 to 5.85GHz switch

RFMD's new RF5540 is designed specifically for high performance WiFi ...

1W Linear high power amplifier

RFMD's new RF5652 high power amplifier is designed to address IEEE 802.11b/g/n ...

I/Q demodulator

Low power semiconductor specialist, CML Microcircuits has added a new Direct ...

SimpleLink Wireless

Introduction to SimpleLink Family

ZigBee® RF4CE

TI's latest ZigBee® RF4CE remote control solution enables mouse-like pointing ...

OMAP35x EVM demo

A demonstration of the OMAP35x evaluation module (EVM): the first platform to ...

Patent trolls

Not only has the world become more litigious, it also seems to place more value ...

The MicroTAC lingers on

Are you nostalgic for the mobile phones of yore, which weighed a lot, had ...

Andy Start interview

What does the British president of the US multinational operation think about ...

Patrick Zammit, Avnet

Patrick Zammit, president, Avnet Electronics Marketing EMEA, talks with Chris ...

David Cleevely interview

Dr David Cleevely, telecoms expert and chairman of Cambridge Wireless, ...