22 January 2008

Research group to develop low cost fuel cells

An energy materials research group from the University of Surrey has won a grant from the EPSRC to develop new low temperature alkaline polymer fuel cells.


Currently most fuel cells use acidic polymers and therefore need platinum electrocatalysts to work. The research, lead by Dr John. Varcoe, will investigate the possibility of using alkaline, rather than acidic, polymers. These may enable the use of less expensive metals in their electrocatalysts.
Accordint to Dr Varcoe: “We recently successfully completed a three year EPSRC funded programme developing alkaline membrane fuel cells. Our work showed that, contrary to prior wisdom, alkaline polymers are good ionic conductors and do not suffer from performance losses. This project also showed that metals such as silver can perform as well as platinum in such systems.”
The research, which is due to be completed in March 2011, could also have environmental benefits if the new power sources are longer lasting and less toxic than those in current use.

Author
graham pitcher

Supporting Information

Websites
http://www.surrey.ac.uk

Companies
University of Surrey

This material is protected by Findlay Media copyright
See Terms and Conditions.
One-off usage is permitted but bulk copying is not.
For multiple copies contact the sales team.

Do you have any comments about this article?

Add your comments

Name
 
Email
 
Comments
 

Your comments/feedback may be edited prior to publishing. Not all entries will be published.
Please view our Terms and Conditions before leaving a comment.

 

Related Articles

Power modules shrink pcb size

Said to shrink pcb size by up to 70% and simplify Class D amplifier design, ...

Project to cut energy use

Thirteen European semiconductor manufacturers have launched a project to cut ...

Feabhas gets OK from ARM

Embedded training specialist Feabhas has been appointed an ARM Approved ...

Embedded Power roundtable

While power supply design is becoming increasingly important, knowledge is ...

Shrinking solutions

A range of customer requirements, including efficiency, board space and cost, ...

Bench power supplies

While digitally oriented switch mode technology is the norm in most areas of ...

Power systems design

This whitepaper looks at how an improved decision flow can help power systems ...

Transparent Electronics Market

Emerging market opportunity analyst, NanoMarkets, believes that three major ...

Mastering power modules

With the strong upsurge in the need for power electronics in applications such ...

600V automotive grade igbts

International Rectifier has launched a new 600V automotive grade igbt platform ...

ADR45xx voltage references

Analog Devices has introduced a new series of voltage references, which it ...

TSOP-6 hexfet mosfets

International Rectifier has launched a new series of devices featuring low ...

Engineering Design Show 2012

10th-11th October 2012, Jaguar Exhibition Hall, Ricoh Arena, Coventry, UK

Keithley's new Model 2657A

In this short video, Keithley applications engineer Dave Wyban shows you how to ...

The Ben Heck Show

The video shows mod guru Ben Heck build robot luggage to help lighten the load ...

Digital motor control

Advanced digital motor control was only an option for high end motor drives and ...

If you snooze, you lose

The pace of development in the mobile phone sector has speeded noticeably in ...

CES 2012 - Intel highlights

Images: highlights from Intel's keynote at the 2012 International CES.

Photos from CES 2012

The latest photos from the Consumer Electronics Show in Las Vegas.

Aurelius Wosylus, AMD

Chris Shaw discusses AMD's latest low power processors with Aurelius Wosylus.

John Schwartz, Digi Int'l

Graham Pitcher finds out from a communications specialist that M2M is slowly ...

Rick Clemmer, ceo, NXP

Rick Clemmer believes high performance mixed signal is just one of the sectors ...