comment on this article

Next-generation optics

EPFL engineers from the Laboratory of Photonic Materials and Fiber Devices (FIMAP) have developed a method to create metasurfaces that overcomes previous technical challenges.

Optical circuits could revolutionise the performance of many devices. Not only are they 10-100 times faster than electronic circuits, but they also consume a lot less power.

Within these circuits, light waves are controlled by extremely thin surfaces called ‘metasurfaces’ that concentrate the waves and guide them as needed. The metasurfaces contain regularly spaced nanoparticles that can modulate electromagnetic waves over sub-micrometre wavelength scales.

Metasurfaces could enable engineers to make flexible photonic circuits and ultra-thin optics for a host of applications, ranging from flexible tablet computers to solar panels with enhanced light-absorption characteristics. They could also be used to create flexible sensors to be placed directly on a patient's skin, for example, in order to measure things like pulse and blood pressure or to detect specific chemical compounds.

The catch is that creating metasurfaces using the conventional method, lithography, is a fastidious, several-hour-long process that must be done in a clean room.

EPFL engineers from the Laboratory of Photonic Materials and Fiber Devices (FIMAP) have now developed a simple method for making them in just a few minutes at low temperatures - or sometimes even at room temperature - with no need for a clean room. The EPFL's School of Engineering method produces dielectric glass metasurfaces that can be either rigid or flexible. The results of their research appear in Nature Nanotechnology.

The new method employs a natural process already used in fluid mechanics: dewetting. This occurs when a thin film of material is deposited on a substrate and then heated. The heat causes the film to retract and break apart into tiny nanoparticles. "Dewetting is seen as a problem in manufacturing - but we decided to use it to our advantage," says Fabien Sorin, the study's lead author and the head of FIMAP.

With their method, the engineers were able to create dielectric glass metasurfaces - rather than metallic metasurfaces - for the first time. The advantage of dielectric metasurfaces is that they absorb very little light and have a high refractive index, making it possible to effectively modulate the light that propagates through them.

To construct these metasurfaces, the engineers first created a substrate textured with the desired architecture. Then they deposited a material - in this case, chalcogenide glass - in thin films just tens of nanometres thick. The substrate was subsequently heated for a couple of minutes until the glass became more fluid and nanoparticles began to form in the sizes and positions dictated by the substrate's texture.

The engineers claim their method is ‘so efficient’ that it results in highly sophisticated metasurfaces with several levels of nanoparticles or with arrays of nanoparticles spaced 10 nm apart. That makes the metasurfaces extremely sensitive to changes in ambient conditions - such as to detect the presence of even very low concentrations of bioparticles.

"This is the first time dewetting has been used to create glass metasurfaces. The advantage is that our metasurfaces are smooth and regular and can be easily produced on large surfaces and flexible substrates," says Sorin.

Author
Bethan Grylls

Comment on this article


This material is protected by MA Business copyright See Terms and Conditions. One-off usage is permitted but bulk copying is not. For multiple copies contact the sales team.

What you think about this article:


Add your comments

Name
 
Email
 
Comments
 

Your comments/feedback may be edited prior to publishing. Not all entries will be published.
Please view our Terms and Conditions before leaving a comment.

Related Articles