21 February 2012

Embedded World: Cortus announces processor IP roadmap for embedded SoC applications

  • Embedded World: Cortus announces processor IP roadmap for embedded SoC applications

Cortus, a specialist in 32bit processor IP, has announced it is to launch three new microcontroller IP cores as part of its processor roadmap.

The new cores share common technology with its APS3 core but address complementary market segments. The three new cores will be released over the coming six months.

Michael Chapman, CEO at Cortus, said: "Although APS3 has been very successful in low power embedded applications such as SIM cards, Bluetooth LE, smart meters, encryption/decryption and touchscreen controllers, customers have been asking for a wider range of performance and complexity options. By mid 2012, Cortus will be able to supply microcontroller cores for applications ranging from high throughput floating point control systems down to programmable finite state machines as well as everything in between".

The APS3 will be complemented by two new integer and one floating point processor cores. The APS5 is designed to support more complex processor subsystems requiring caches, coprocessors and multicore architectures. The FPS6 single precision floating point microcontroller core is said to combine high floating point throughput with a small silicon footprint and low power dissipation.

For small microcontroller subsystems the Cortus will provide an entry level 32bit solution with the APS1 processor. According to Cortus, this core, with a comparable silicon footprint to existing 8bit cores such as 8051, will deliver greater computational performance and while dissipating much less power than 8bit cores. APS1, like other Cortus processors, has been designed to be programmed with C or C++ without the need to use assembly code.

All cores share a common technology base with a modern risc architecture and native 32bit performance. They can all use the fast, low latency APS bus with Cortus peripherals. Cortus supplies a GNU based APS toolchain and an Eclipse-based IDE which supports the entire product family. Ports of FreeRTOS, OpenRTOS and Micrium uC/OSII are available for the processor product range.

Cortus will be exhibiting on stand 5-143 at Embedded World 2012 in Nürnberg, Germany.

Author
Chris Shaw

Supporting Information

Websites
http://www.cortus.com

Companies
Cortus SA

This material is protected by Findlay Media copyright
See Terms and Conditions.
One-off usage is permitted but bulk copying is not.
For multiple copies contact the sales team.

Do you have any comments about this article?

Add your comments

Name
 
Email
 
Comments
 

Your comments/feedback may be edited prior to publishing. Not all entries will be published.
Please view our Terms and Conditions before leaving a comment.

 

Related Articles

HiSilicon licenses Mali gpus

HiSilicon has licensed a range of ARM Mali gpus, including the Mali-400 MP and ...

AMD launches R series

AMD has extended its embedded systems product range with the announcement of ...

Feabhas gets OK from ARM

Embedded training specialist Feabhas has been appointed an ARM Approved ...

Laying foundations

Infineon has recently announced a multicore architecture which will be the ...

Offloading tasks from the mcu

The single biggest concern among microcontroller users used to be system cost, ...

GPUs to enter mainstream

Until recently, demand for more processor performance has been met by faster ...

Migrating ARM7 code to a Cortex-M3 mcu

This white paper by Todd Hixon from Atmel covers the differences between ARM7 ...

Batteries worldwide celebrate the arrival of ...

The explosion in use of battery operated electronics is followed by the need ...

System Verilog & OVM: Mitigating ...

This white paper from Applied Micro looks at the challenge of verification – a ...

ARM Cortex-M3 EFM32

Energy Micro has unveiled two starter kits (STKs) based on the EFM32 Leopard ...

RF3688 802.11 b/g/a/n FEM

RFMD's new RF3688 is a single chip dual band front end module (FEM) for high ...

RF5540 4.9 to 5.85GHz switch

RFMD's new RF5540 is designed specifically for high performance WiFi ...

Microchip seminars

May 8th – Milan, Italy May 10th – Rome, Italy May 15th – Corby, UK May 17th ...

Remote sensing demo

Amy demonstrates a remote sensing application across 100 feet of wire using the ...

Code Name: Wolverine

An overview of the new Wolverine line from MSP430

LM48901 Spatial Audio Overview

Eric shows how TI's LM48901 spatial audio array IC delivers an immersive 3D ...

Qualcomm buys Ubicom

Qualcomm has, apparently, acquired Ubicom with hardly a fanfare. It's the end ...

ARM’s M0+ core

There has been a lot of talk in recent months about the 'internet of things'; a ...

ARM changes 8bit mcu life span

Despite all the hullaballoo surrounding 32bit mcus, 8bit parts remain firm ...

Aurelius Wosylus, AMD

Chris Shaw discusses AMD's latest low power processors with Aurelius Wosylus.

Ian Menzies, General Dynamics

Graham Pitcher finds out how a new network will give Welsh electronics ...

Maria Marced, President, TSMC

Innovation, technology and the right people. Graham Pitcher finds out why ...