comment on this article

2D could enable EVs to travel 500 miles on a single charge

2D catalysts power an electric vehicle. Credit: Amin Salehi-Khojin

Lithium-air batteries are poised to become the next revolutionary replacement for currently used lithium-ion batteries that power electric vehicles (EVs), cell phones and computers.

Lithium-air batteries, which currently are still in the experimental stages of development, can store 10 times more energy than lithium-ion batteries, and they are much lighter. That said, lithium-air batteries could be even more efficient and provide more charge with the incorporation of advanced catalysts made from 2D materials. Catalysts help increase the rate of chemical reactions inside batteries, and depending on the type of material from which the catalyst is made, they can help significantly boost the ability of the battery to hold and provide energy.

"We are going to need very high-energy density batteries to power new advanced technologies that are incorporated into phones, laptops and especially EVs," said Amin Salehi-Khojin, associate professor of mechanical and industrial engineering in the University of Illinois at Chicago's (UIC) College of Engineering.

Assoc Prof. Salehi-Khojin and his colleagues synthesised several 2D materials that can serve as catalysts. A number of their 2D materials, when incorporated into experimental lithium-air batteries as the catalyst, enabled the battery to hold up to 10 times more energy than lithium-air batteries containing traditional catalysts.

"Currently, electric vehicles average about 100 miles per charge, but with the incorporation of 2D catalysts into lithium-air batteries, we could provide closer to 400 to 500 miles per charge, which would be a real game-changer," he continued.

The researchers also synthesised 15 different types of 2D transition metal dichalcogenides (TMDCs). These are unique compounds because they have high electronic conductivity and fast electron transfer that can be used to participate in reactions with other materials, such as the reactions that take place inside batteries during charging and discharging.

The investigators experimentally studied the performance of 15 TMDCs as catalysts in an electrochemical system mimicking a lithium-air battery.

"In their 2D form, these TMDCs have much better electronic properties and greater reactive surface area to participate in electrochemical reactions within a battery while their structure remains stable," explained Leily Majidi, a graduate student in the UIC College of Engineering and first author of the paper.

"Reaction rates are much higher with these materials compared to conventional catalysts used such as gold or platinum," Majidi continued.

One of the reasons the 2D TDMCs performed so well, according to the team, is because they help speed both charging and discharging reactions occurring in lithium-air batteries.

"This would be what is known as bi-functionality of the catalyst," noted Assoc Prof. Salehi-Khojin.

The 2D materials also synergise with the electrolyte: the material through which ions move during charge and discharge.

"The 2D TDMCs and the ionic liquid electrolyte that we used acts as a co-catalyst system that helps the electrons transfer faster, leading to faster charges and more efficient storage and discharge of energy.

"These new materials represent a new avenue that can take batteries to the next level, we just need to develop ways to produce and tune them more efficiently and in larger scales," Assoc Prof. Salehi-Khojin concluded.

Author
Bethan Grylls

Comment on this article


This material is protected by MA Business copyright See Terms and Conditions. One-off usage is permitted but bulk copying is not. For multiple copies contact the sales team.

What you think about this article:


Add your comments

Name
 
Email
 
Comments
 

Your comments/feedback may be edited prior to publishing. Not all entries will be published.
Please view our Terms and Conditions before leaving a comment.

Related Articles

Fault detector

A tool that is able to spot defects or unwanted features much earlier in the ...

On-chip optical link

For the first time, researchers of the University of Twente (UT) succeeded in ...

Managing your IPR

It’s essential that companies consider managing their intellectual property ...

Where next in 2019?

From the first autonomous vehicles to 5G and the realisation of mobile AR ...

Real world problems

Capacitive touchscreens are constructed using an orthogonal grid of transmitter ...

Schaffner LCL filter

Schaffner has launched its FN 6840 standard LCL filter range, ready to be ...

Get to market faster

A quick look at using Vicor's PFM and AIM in VIA packaging for your AC to Point ...

A racing certainty

AI has shaken the automotive industry to its core, inspiring a revolution. ...

Storm clouds gather

The latest quarterly report from the EEF, the manufacturers’ organisation, ...

Piezoelectric haptics

Boréas Technologies’ CEO, Simon Chaput, talks to Neil Tyler about the company’s ...

Teach them to fish

Last year was dubbed the “worst ever” by the Online Trust Alliance for data ...