|
Platform to help designers save time and money
|
13/06/2008
|
| |
RS Components has released its Embedded Development Platform, which has been designed to help engineers save cost and time during the product design phase.
The solution consists of a baseboard, which can hold up to four cpu or application modules. The EDP is said to be the first step in a process that will see the regular introduction of new processor and application modules.
The baseboard measures 220 x 100mm and is fitted with rubber feet for laying flat on the bench. It can also be used in a standard rack system. By adding a 64way DIN connector (not supplied), the EDP can be plugged into a backplane. The board is fitted with 3.3V and 5V regulators, a back up battery, RJ45 Ethernet and mini USB connectors, 12V dc power supply jack, I/O breakout header and eight DIP switches ported onto the system i²c bus.
|
| |
Author
Graham Pitcher
|
| |
| |
|
| Email this article |
| |
|
|
|
|